Dear all secr users,
I am using camera traps data to perform secr models. I have 4 different chimpanzee communities, and I wanted to see if I could estimate the home range of each group thanks to the results of the secr model (and the estimation of sigma).
From what I gather through reading, home range area is possible to obtain using the value of sigma, if gaussian encounter probability model is used. The best AIC model was the MBk one, I used the half normal key function, and computed the 95% territory usage via the calculus pi*(sigma*sqrt(5.99))^2. (Chapter 5 of the secr book from 2014).
In this chapter, on the wolverine example, the authors though advise against biological interpretations of home range area based on the sigma estimate from SECR. From what I understand it could be misleading if the traps affect the individuals use patterns, which I assume is not the case in my study. I will still treat those home range area estimates with cautions but thought this would be more relevant than MCP that is fully constrained by my camera array. I wonder if anyone has any thoughts on the matter.
Furthermore, I would like to be able to map those home range areas. I used the function fxi.contour on all my individuals to get a “space use” for each of my individuals in one group. I checked what happened if I set the fxi.contour percentage at 100%. I am obtaining a very big area by overlaying all the polygon from each individual extracted from the fxi.contour results.

The blue dots are the cameras, and they cover an area of 10 km x 10 km.
I then decided to try to understand what was happening and had a look at each individual space use estimated via fxi.contour.
On this second figure (only a subsample of all individuals), blue points are still camera, green points are the camera where the specific individual has been captured and on the title is of each graph the name of the individual and the number of times we captured them. The big red dot is the home range center.

I directly noticed that the more captured an individual has been, the more tighten around the home range center the results of the fxi.contour was. For the individuals with more than 2 captures (top middle and right, Cybele and Phine) the results are circle very closed to the home range center with even some cameras where they have been captured not included in that area.
I assume I should not take the 100% data, but I was wondering as the number of captures is affecting the size of the “space use” if there was a recommendation on having only a certain number of captures to be able to perform fxi.contour function on individuals (obviously 1 capture individuals should not be used but 2 times capture individuals also give unrealistic results). And I also wondered if the results on fxi.contour with some restrictions on capture frequency could be used the way I showed above to determine an home range area for my different groups. If not, would there be another way to access the territory of my different groups via the results of the secr model?
Any advice on the matter would be greatly appreciated!
Best regards,
Benjamin Debetencourt
--
You received this message because you are subscribed to the Google Groups "secr" group.
To unsubscribe from this group and stop receiving emails from it, send an email to secrgroup+...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/secrgroup/26519da7-6fcf-4fc8-848e-162a34278883n%40googlegroups.com.