On Apr 10, 2022, at 2:08 AM, Mike Ladwig <mdla...@gmail.com> wrote:
Hello everyone! Got all the .H8T archives converted (separate thread on KCS) to .WAV files for my cassette -based system and so far all the binary software loads and runs without error; some Basic software does too.
--
You received this message because you are subscribed to the Google Groups "SEBHC" group.
To unsubscribe from this group and stop receiving emails from it, send an email to sebhc+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/30da88ca-795c-47b2-b556-6e7b0682df4fn%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/DBCA47DF-1473-4443-B52E-AADE4DBC4FA6%40gmail.com.
Mike: these are the images that you converted from .H8T to .WAV? and you got the .H8Ts from Les’ site on github?
I can tell you that the .H8Ts work.
What is your console configuration? H8-5 only? No H8-4 installed? The later versions auto-detect the serial card and give priority to the H8-4. If you’ve got one that’s where it will look for the console.
If H8-5 what BAUD is the console port wired for? And is IRQ 3 enabled for the console? If H8-4 say more about how you configured the board.
What do you mean by “hang”. What exact steps did you perform? I can try to reproduce (but from the H8Ts)…
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/fb28523a-cf60-4f07-8a2b-ea1fe123f777n%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/fb28523a-cf60-4f07-8a2b-ea1fe123f777n%40googlegroups.com.
On Apr 16, 2022, at 12:12 AM, Mike Ladwig <mdla...@gmail.com> wrote:
Yep, you were right. The later versions need a tap or two on the space bar after hitting go on the keypad -- then they work perfectly.
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/495a4efe-3c68-4333-92d8-c490d7f0d0f9n%40googlegroups.com.