Attached is first Pass for the BOM, which I'm still reviewing. There is a PDF file and Excel file with the first Column locked. Feel free to use and report out any issues.
I will like to thank Terry Smedley for putting this together as it takes a lot of time and energy.
For next BOM on the H8 Front Panel, I will load it into Mouser.com as a BOM, so that it is easy to buy all the parts easily.
Thanks,
Norberto
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/001601d7338f%24cfbd2b60%246f378220%24%40gmail.com.
Here is the link to the Z80 V4.0 Jumper Settings.
http://koyado.com/Heathkit/H8-Z80-64K-RTC-ORG0-V4_files/Z80_V_4_0_Jumper_Definition.pdf
Thanks to Terry S. for taking the time and efforts to create such file.
Let us know if any concerns.
Norberto
My bad on first line:
SW501 | ORG0 Config – Refer to slide # 6 on how to setup such switch based on HW configuration |
The switch listed in this file is when using Heath PAM37 monitor on the Z80 V4 board. The Z80 V4 board supports all Heath monitors as it is backwards compatible.
For Z80 v4 monitor : h8mon2-v2.0b24.rom.zip
SW501 is as follows:
For Terry’s G. monitor is going to be different (WIP)
Thanks,
Norberto
To view this discussion on the web visit https://groups.google.com/d/msgid/sebhc/E4D05F42-FEBD-4BDE-A134-045F872443DB%40koyado.com.