Dear Peter,
Thanks a lot for your prompt reply. I waited for Matlab Drive to sync the new version and then tried to run the lines of code below again. Unfortunately, the error is still the same:
The class SE3 has no Constant property or Static method named 'check'.
Error in PBVS/init (line 110)
vs.camera.T = SE3.check(vs.T0); % set camera back to its initial pose
Error in VisualServo/run (line 122)
vs.init();
When I check the dates of files in the Matlab Drive folder, several files have a date of 19/07/2020, so the toolbox seems to have been updated. Also the problem I had with the mkgrid command got resolved this way, but apparently, this problem is still there.
Regards,
Angelika
--
You received this message because you are subscribed to the Google Groups "Robotics & Machine Vision Toolboxes" group.
To unsubscribe from this group and stop receiving emails from it, send an email to robotics-tool-...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/robotics-tool-box/6b228a9c-e95d-4f4e-bb1a-eb77103de878o%40googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to robotics...@googlegroups.com.