Problem with loading results in HD-Explore

38 views
Skip to first unread message

橘子

unread,
Oct 22, 2024, 6:00:36 AM10/22/24
to roast-users
Hi!
I am facing an issue when using Soterix software HD-Explore to load the results output from ROAST. Here are the steps I took and the problem I encountered:

First, I ran the command "roast('example/Chinese2020.nii','leadField','resampling','on','simulationTag','Chinese2020HDE')". 
After that, I used the script provided by Soterix manufacturer and ran "roast2HDE('D:\software\roast-master\example\Chinese2020.nii','Chinese2020HDE')". 
However, after running 71 electrodes, an error was reported.

The error message is as follows:

Error using load_nii_hdr (line 32)
Cannot find file “D:\software oast-master\example\Chinese2020_ras_T1orT2_masks.nii”.
Error load_untouch_nii (line 103)
[nii.hdr,nii.filetype,nii.fileprefix,nii.machine] = load_nii_hdr(filename);
Error roast2HDE (line 218)
masks = load_untouch_nii(masksFile).

As mentioned in the error message, there is no “Chinese2020_ras_T1orT2_masks.nii” file in the result generated by running the first line of code. I would like to know if running "roast() generate the lead field" should produce a "Chinese2020_ras_T1orT2_masks.nii" file? Also, I am not sure if this error is caused by ROAST or the script provided by Soterix manufacturer. Below are the files generated after I ran "roast()". Are there any errors?
屏幕截图 2024-10-18 113739.png

屏幕截图 2024-10-18 113718.png
Looking forward to your reply and solution.

Thank you very much!

Best regards,
Yang.

Yu (Andy) Huang

unread,
Oct 22, 2024, 11:27:54 AM10/22/24
to 橘子, roast-users
Please note that Soterix software is only compatible with ROAST v3.0, not the latest version of v3.5. Soterix will provide a new interface code in the future to be compatible with ROAST v3.5.

So if you ran ROAST v3.5, please re-run using v3.0. Also please contact Soterix for the latest version of roast2HDE.

Hope this helps.

--
You received this message because you are subscribed to the Google Groups "roast-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to roast-users...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/roast-users/5043b12f-354c-4cfe-876b-3b6f430d3bb3n%40googlegroups.com.
Reply all
Reply to author
Forward
0 new messages