Thanks Bill. I've just ordered 15 pieces from UTSource, so hopefully these will be fine.My 6809 design is in it's early days right now. I have a bunch of 6808E and 6309E chips in PLCC packaging but had a heck of a time finding the pinout for the PLCC "E" versions. But I've finally managed to track down the information I need, so I'm busy researching designs. I've always been a Z80 man myself, so this chip is brand new to me too, but it's always been on my wishlist. When I get a bit further along, I'll post some information up to my web site.
Alan,
What hardware are expected to run Flex9, NitrOS9, or Cubix? I assume they need a mass storage device, serial port, timer, possibly banked RAM? I'm looking into porting Assist09 monitor which needs a serial port and timer/counter (6840). Easy enough for me to build a expansion board with 6840 and CF disk, but I like to add whatever hardware needed by the operating system.
--
You received this message because you are subscribed to the Google Groups "retro-comp" group.
To unsubscribe from this group and stop receiving emails from it, send an email to retro-comp+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/retro-comp/dedf0003-b078-4e2b-bff2-52f312804b97n%40googlegroups.com.
"Thanks for your payment, but we are sorry to let you know regarding order item AT27C512R-45PU ,
our supplier just called us it was nearly sold out, we tried from other suppliers,
but the price is $100 /pcs, Can you accept it ? If yes, pls pay us below :
100* 30-90.2634=2909.7366
Pls pay $2909.74 to our paypal account ......"
^^^^^^^^^^^ !!!!!
"Thanks for your payment, but we are sorry to let you know regarding order item EPM7064SLC44-10 ,
our supplier just called us it was nearly sold out, we tried from other suppliers,
but the price is $ 7.5 /pcs, Can you accept it ? If yes, pls pay us below :
$7.5*15pcs-$34.47=$78.03
Pls pay $78.03 to our paypal account ......"
To view this discussion on the web visit https://groups.google.com/d/msgid/retro-comp/95046fa1-0c57-43cf-bef2-d8d851e492c0n%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/retro-comp/64e74af4-cafa-43a7-8883-b76088d1a27an%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "retro-comp" group.
To unsubscribe from this group and stop receiving emails from it, send an email to retro-comp+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/retro-comp/d0e45e44-c03f-4ee6-8a63-7416a5b87aben%40googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/retro-comp/6e97c263-b0e3-47fa-ad5f-88a5c63c03a4n%40googlegroups.com.