New Diagram

[NZ0I]

I have updated the project with the following diagram. Now that the Control Head has been mothballed, it seemed wise to revise the documentation describing the newer concept:

Please let me know if you have suggestions for ways to improve the diagram... or to improve the project for that matter.

[Gerald Boyd]

Trying to think how we can graphically showcase the flexibility of what the smart phone image and digital interface board provides. Not sure if some images of different user GUI's flying out from the screen and how software becomes the application. 

 

Purpose to show a universal interface that can control almost anything.

Under the yellow box some small photos of example devices. ARDF receiver,transmitter,QRP transceiver,APRS tracker, homemade signal generator etc. 

Purpose to show that the hardware application could be just about anything 

This architecture can be adapted to lots of applications.
Jerry 
Sent from my iPhone

--
You received this message because you are subscribed to the Google Groups "Receiver Development Platform" group.
To unsubscribe from this group and stop receiving emails from it, send an email to receiver-development...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/receiver-development-platform/a7d894d4-0535-4e71-859c-27996684c342%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[NZ0I]

Good ideas all. Perhaps it would be best to have several example application diagrams, so as to avoid making a single diagram too complicated.

Along those lines, I've been thinking that we really ought to use the Digital Interface Module in the transmitter design as well as for the receiver. Two main reasons:

1. Applying the Digital Interface to two different applications will help improve the Digital Interface design, improving it for more diverse applications.

2. To fit the transmitter into a smaller chassis, it will help to have several layers of boards vertically, thereby reducing the horizontal board area.

On Thursday, June 22, 2017 at 9:04:49 AM UTC-4, Gerald Boyd wrote:

Trying to think how we can graphically showcase the flexibility of what the smart phone image and digital interface board provides. Not sure if some images of different user GUI's flying out from the screen and how software becomes the application. 

 

Purpose to show a universal interface that can control almost anything.

Under the yellow box some small photos of example devices. ARDF receiver,transmitter,QRP transceiver,APRS tracker, homemade signal generator etc. 

Purpose to show that the hardware application could be just about anything 

This architecture can be adapted to lots of applications.
Jerry 
Sent from my iPhone

On Jun 21, 2017, at 9:09 PM, NZ0I wrote:

I have updated the project with the following diagram. Now that the Control Head has been mothballed, it seemed wise to revise the documentation describing the newer concept:

Please let me know if you have suggestions for ways to improve the diagram... or to improve the project for that matter.

--
You received this message because you are subscribed to the Google Groups "Receiver Development Platform" group.

To unsubscribe from this group and stop receiving emails from it, send an email to receiver-development-platform+unsub...@googlegroups.com.