Remoska lid

[Helen Roche]

I bought a second-hand Remoska today (counter top oven thingy). It heats up, but the lid rattles, and it looks as though the handle attachment may be lose. It's held together with these screws / bolts. What are they? And do we have a tool that will open them?

[Helen Roche]

Underside: 

[Mr E]

That looks just like it would take a large flat bladed screwdriver, looking at the slot.

Only other guess is that it's a rivet you'd drill out and then replace.

All the best.

Rupert

--
You received this message because you are subscribed to the Google Groups "rLab / Reading's Hackspace" group.
To unsubscribe from this group and stop receiving emails from it, send an email to reading-hacksp...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/reading-hackspace/c8c618ce-f6a4-4ea2-94b5-0c9dc1475712n%40googlegroups.com.

[Helen Roche]

Thanks! Yes, I guess I should try a screwdriver first. 

[Huw Millar]

It might need some friction on the back to stop the whole insert spinning, when you unscrew!

Get Outlook for iOS

---

From: reading-...@googlegroups.com <reading-...@googlegroups.com> on behalf of Helen Roche <helen...@gmail.com>
Sent: Thursday, April 28, 2022 11:06:19 PM
To: rLab / Reading's Hackspace <reading-...@googlegroups.com>
Subject: Re: [RDG-Hack] Re: Remoska lid

 

To view this discussion on the web, visit https://groups.google.com/d/msgid/reading-hackspace/eccecf1f-08e1-48ba-8180-e32a6c4976f4n%40googlegroups.com.

[Helen Roche]

Bingo! A flat screwdriver did it. The rattle was caused by a mysteriously missing nut having allowed a small clip to fall off (from holding the glass window in place).  All fixed now, handle tightened up, good to go.