FS: 58cm Canti-Sam Hillborne Frameset, Wheelset, Nitto Rack

[Adam in Indiana]

Hi all, I'm putting my Sam up for sale to see if there's any interest. I like the bike, but it's my least ridden, and I'm outta room/money in the bike shed...

I was thinking of a "rolling chassis" sale: the usual frame & fork, headset (a Campy, in this case), bottom bracket, and seatpost, along with the wheelset and fenders. Here's the details:

58cm Sam Hillborne Frameset, stock seatpost, bottom bracket, Campagnolo Record headset. Frame is in very good condition, with two small chips; one on the fork dropout, the other on the head tube lug. I've put a dab of clear shellac over both chips.

Handbuilt 32h wheelset: Shutter Precision dyno hub black, DT Swiss 350 rear hub, silver and black DT Swiss spokes, DT Swiss silver brass nipples, H+Son TB14 polished rims. Each wheel has two black spokes on either side of the black H+Son rim badge. I'd guesstimate 300 miles or less on them.

Fenders: Berthoud stainless, 50mm wide. Drilled for the Sam with a Nitto M12 rack, which is why I'm including them in the sale. Nitto Rack is in good condition, but the top deck tubes have a slight wavy bend to them from being fitted to another bike. Not the fork crown bolt, though.

Asking $1400 + shipping. I'd like to take it to a shop to have it professionally packed; Riv dealer Chris Wiggins is about 1-1/2 hours from me in Indianapolis, so if he's willing I'd likely take it there.

Pictures: https://drive.google.com/folderview?id=1INagmnY6yZxmcrd6EXbsVjiVJDKV4eE7

And if someone reeaally wants the complete as seen in the pictures, we can prolly work something out. Not my Brooks, though.

Thanks!

[Dave Grossman]

Where in Indiana are you located?

[Adam in Indiana]

SOLD!

Thanks everyone for all the interest!