Speculating here. I may come to a situation where I will be swapping SA AM and ASC wheels. The ASC takes a unique and proprietary trigger shifter, thus a wheel swap would mean a shifter swap.
I mount my trigger shifters toward the bottom of the curve on the right-side drop bar hook, about 3" below the brake lever. I'd like to be able to slide the different shifters on and off the bar. That means I won't want bar tape (or Velox bar plugs) getting in the way.
One solution might be to tape the bar from brake lever upward and use an easy on/off grip for the bottom of the bar. IIRC, Craig Montgomery did this to one or some of his touring bikes.
So, question: Is there a non-anatomical (ie, non-"ergonomic") grip that can more or less easily slide on and off the ends-of-hooks flats of a 25.4 mm bar?
Or would I be left with spreading and re-squeezing the clamp every time I made the swap?
I suppose I could even use Ergons; really, the bigger problem is the 25.4mm diameter of the bar.
Any thoughts?
Thanks.
-- ![]()
-----------------------------------------------------------------------
Patrick Moore
Alburquerque, Nuevo Mexico, Etats Unis d'Amerique, Orbis Terrarum