Paul Racer M Calipers F&R/Black/Center Mount/Recessed

[Paul Brodek]

Paul Racer M Calipers F&R/Black/Center Mount/Recessed: $210 shipped conti USA; paypal G&S

Note that these are fairly easy to switch to nutted mount with standard M6 button-cap bolts.

I swapped out these lightly-used black calipers for a new silver set. Offering these for sale knowing full well I'll probably need them within the next 2-3 months, because that's what always happens.

This is a lightly-used full front-rear set, so an entire bike's worth. I'm including all the new hardware that came with my new silver calipers, so you'll have a clean install. So new brake shoes, new straddle cables, new straddle yokes. Most importantly that means you'll receive not one, but TWO new Paul stickers. You can't have too many Paul stickers.

I'm also including the boxes and instructions the silvers came with, which will make packing everything up a little easier.

Springs/pivots are tight/smooth, all threads are good.

Cosmetically very clean, with a few light smudges/marks. There's some light surface corrosion on a couple of the springs, which is very common.

The rear caliper has a couple of small, shallow sections filed out, maybe to clear fenders or a rack? I got these used, can't recall doing this myself, but at any rate the mod is very minor and has no structural effects.

Shout with Qs!

A few pix links below, more on flickr:

https://flic.kr/s/aHsk4hRDyg

https://flic.kr/p/2jH2pjW

https://flic.kr/p/2jH2piP

https://flic.kr/p/2jGXQTM

https://flic.kr/p/2jH3cVH

https://flic.kr/p/2jH3cUA

https://flic.kr/p/2jH2p6K

Paul Brodek

Hillsdale, NJ USA

[Paul Brodek]

Sorry I missed the "FS" in the title. Can't seem to edit this myself?

Also might mention that these are great for 650b conversions, and also for fender use due to the fantastic under-caliper clearance.

PB

[Paul Brodek]

 These puppies sold, folks---thanks!