Vintage Levers with New Brakes?

140 views
Skip to first unread message

Matthew Williams

unread,
Jan 24, 2021, 5:26:23 PM1/24/21
to RBW Owners Bunch
Hi everyone,

Will these vintage levers work with a modern pair of Tektro V-brakes/linear-pull brakes?

levers.jpgbrakes.jpg

Joe Bernard

unread,
Jan 24, 2021, 5:57:43 PM1/24/21
to RBW Owners Bunch
Nope, you need long-pulls. You can have these for shipping (should be less than $10) if you just need something that works for cheap. Tektro with the graphics wearing off and lean-against-the-fence rub on the ends, but all there and good. Adjustable for pull ratio, too, but will come to you set up for v-brakes. 

Joe Bernard
Marin County CA. 
20210124_145331.jpg

Matthew Williams

unread,
Jan 26, 2021, 8:49:41 PM1/26/21
to rbw-owne...@googlegroups.com
One of my levers failed so I just replaced it with a spare. At some point I'll probably upgrade to a set of Pauls or an equivalent.

Thanks very much for the information and the offer, Joe!




--
You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bun...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/a490478e-943f-4b72-8746-14b107d76e68n%40googlegroups.com.
<20210124_145331.jpg>

Reply all
Reply to author
Forward
0 new messages