Autorx on raspberry

[Robert Franchino]

After many installations following the protocol to the letter I can't display AutoRx on the browser. I always get the same error:
This site is inaccessible192.168.0.46 does not allow connection.
However I can access it and make it work without any problem with Putty.
Can you help me please?
thank you

[Robert Franchino]

Clarification for the URL...

I type 192.168.0.46:5000

--
You received this message because you are subscribed to a topic in the Google Groups "radiosonde_auto_rx" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/radiosonde_auto_rx/-kjSKE1QtU4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to radiosonde_auto...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/radiosonde_auto_rx/5bd3ec55-53dd-4886-8f3f-604aee9d6960n%40googlegroups.com.

[Mark Jessop]

As discussed on the issue that you also raised on the auto_rx repository ( https://github.com/projecthorus/radiosonde_auto_rx/issues/541 ), the debugging steps showed that auto_rx is not running.

The next step is to try and start up auto_rx separately of systemd (as was recommended in the installation guide) to see what is going wrong: https://github.com/projecthorus/radiosonde_auto_rx/wiki#44-initial-testing

If this appears to work, *then* you can proceed to running the systemd setup steps: https://github.com/projecthorus/radiosonde_auto_rx/wiki#451-option-1---operation-as-a-systemd-service-recommended

And in particular, check the log output: sudo journalctl -u auto_rx.service -f -n

73

Mark VK5QI

You received this message because you are subscribed to the Google Groups "radiosonde_auto_rx" group.
To unsubscribe from this group and stop receiving emails from it, send an email to radiosonde_auto...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/radiosonde_auto_rx/CADXYY%3DX_z0CdgSkrJ4%2BSzjyhiATKHasXMSaZiUPoZ%3DjSKncxrQ%40mail.gmail.com.