Hi Lite,
So I got my 4" x 100' continuous label roll today and did some more tests, please see attached sample print outs.
With the "adobe-print-dhl_doc-size-4_6.jpg" and "adobe-print-dhl_doc-size-4_8.jpg" files, I printed these directly from Adobe and as you can see they printed out fine.
With the "qztray-print-dhl_doc-size-4_6.jpg", "qztray-print-usps_doc-size-4_6.jpg", and "qztray-print-checkin_doc-size-5_3.jpg", I printed these from my website with QZ Tray; for the most part they didn't print out that bad but noticed the following issues.
1. You can see that the edges seem to get cut off, is there any QZ Tray parameter I can submit to get this to print properly without getting cut off?
2. Regarding the "qztray-print-checkin_doc-size-5_3.jpg" image, I set the QZ Tray W @ 4" x H @ 3" but the actual PDF document size is 5" x 3"; do you think this could be causing issues with this not printing out properly? Should I have my developer change this so PDF document size gets generated at 4" x "3 to match QT Tray parameter inputs?
3. It seem to work print out the best when I don't include any "orientation" in my QZ Tray request, but why doesn't this work properly when I include portrait or landscape; am I not using this correctly?
4. Regarding the "adobe-print-dhl_doc-size-4_8.jpg", this prints out fine in Adobe, as you can see from the photo, but for some reason I can't get this to print out at all using my website with QZ Tray. I initially set W @ 4" x H @ 8" but doesn't print anything out. I then tried changing to 3.9" x 7.9", 4" x 9", 4" x 10", etc. but nothing prints out. It only seems to print out when I use 4" x 6" but it doesn't print out properly due to the size of the document being 4" x 8"...is there anything else I can try to debug this?
Thank you, again!
Bernie