HCL - Librem 13 V3

[Elburz Sorkhabi]

Empty Message

[pixel fairy]

On Saturday, July 7, 2018 at 2:21:50 PM UTC-7, Elburz Sorkhabi wrote:
> Empty Message

how is it?

performance? suspend/resume? does the iommu work? external devices, such as monitors? can you try 4k over hdmi?

[zac...@gmail.com]

On Saturday, July 7, 2018 at 2:21:50 PM UTC-7, Elburz Sorkhabi wrote:
> Empty Message

Did you have to take any additional steps to get Qubes working on the Librem 13 v2?

Any success with Qubes R4.0.1?

[m...@militant.dk]

I did a reinstall of 4.0.1 last week and it went smooth, so you should be good, if your coreboot is fairly recent

I run Qubes 4.0.1 on Purism Librem 13v2 laptop with all the bells and whistles (16GB, nvme pro). 4k is only working @ 26Hz through the HDMI port, so that is the definition of laggy right there. Terrible. Horrible. The keyboard mapping is also faulty, from the factory, so you have to adjust it in rc.local or similar.

I wrote up my experiences a while back, and just updated it with the latest 4K annoyances: https://www.militant.dk/2018/02/22/ordering-a-purism-librem-13v2-to-run-qubes-4-0rc4/

These faults are actually a dealbreaker for me. I can't live with this device anymore, so I'm looking to switch it out with a mac mini size device or something similar, that can run 4k @ 60Hz, like normal machines, claiming to support 4k, should.

Enjoy

[pixel fairy]

On Wednesday, February 6, 2019 at 1:58:24 AM UTC-8, m...@militant.dk wrote:

> These faults are actually a dealbreaker for me. I can't live with this device anymore, so I'm looking to switch it out with a mac mini size device or something similar, that can run 4k @ 60Hz, like normal machines, claiming to support 4k, should.
>
> Enjoy

im pretty happy with system76 galago. 4k at 60Hz over display port. think it was 30Hz over hdmi, which was still usable.

the only issue is if you start an appvm in single display mode, then plug in the display port, apps in that vm wont take input when on the external display until you restart that vm. dont remember having that problem with hdmi. also, in xfce, plugging and unplugging display port seemed to reset the display, so it would always shuffle windows around and ask you to reconfigure the displays. in kde, this isnt a problem. it remembers how you set it up before. but, the window input issue is still there.

[marmot-te]

for the librem13v2

-The coreboot was not up to date at the delivery (so i did it)
-with QubesOS, i have some problems for connecting externals HDD, only
one usb port accept it (no solutions for me now)
-Coreboot don't reconize my encrypted TAILS key and have some problems
with some others live USB keys ...(no solution for me now)