Hello, you can help set up
https://github.com/tasket/Qubes-vpn-support/ Qubes-vpn-support
#sorry my bad English
I seem to have done everything according to the instructions, but when I enter systemctl status qubes-vpn-handler shows:
● qubes-vpn-handler.service - VPN Client for Qubes proxyVM Loaded: loaded (/usr/lib/systemd/system/qubes-vpn-handler.service; enabled; vendor preset: disabled) Drop-In: / usr / lib /systemd/system/qubes-vpn-handler.service.d 00─00_example.conf Active: activating (auto-restart) (Result: exit-code) since Wed 2018-12-19 22:02:50 MSK; 7s ago Process: 21996
ExecStopPost = / usr / lib / qubes / qubes-vpn-setup - post-stop (code = exited, status = 0 / SUCCESS) Process: 21992 ExecStartPost = / usr / lib / qubes / qubes-vpn -setup - post-start (code = exited, status = 0 / SUCCESS) Process: 21991
ExecStart = / usr / lib / qubes / qubes-vpn-setup - start-exec (code = exited, status = 1 / FAILURE ) Process: 21963 ExecStartPre = / usr / lib / qubes / qubes-vpn-setup --pre-start (code = exited, status = 0 / SUCCESS) Process: 21959
ExecStartPre = / usr / lib / qubes / qubes-vpn- setup --check-firewall (code = exited, status = 0 / SUCCESS) Main PID: 21991 (code = exited, status = 1 / FAILURE)
A VPN-VM window constantly pops up on top: Ready to start link
I also did not quite understand point 2 in the installation:
Copy the VPN configuration files from your service provider to the proxyVM / rw / config / vpn folder, then copy or link the desired configuration to “vpn-client.conf”:
cd / rw / config / vpn sudo unzip ~ / ovpn-configs-example.zip sudo ln -s US_East.ovpn vpn-client.conf
I copied all the configuration files (France.ovpn, ca.rsa.2048.crt, crl.rsa.2048.pem), but what does it mean to associate the desired configuration with vpn-client.conf? After unpacking sudo unzip ~ / ovpn-configs-example.zip, I get a vpn-client.conf-example file. I understand that I need to rename its extension to .conf? Does it need to be edited?