Qube Install fail. due to unsupported hardware.
ric...@techbitz.co.nz
I have tested media with other older computers and it works.
The Laptop I am trying to install to is a;
#Acer predator G9-593-74N1
I have a "GeForce GTX 1070" Mobile chip.
i'm assuming the GFX card is the issue.
I can install via the TUI for some reasion.
When I select HDD option (5)
It doesn't prompt me for an excription key for LUKs
then posts an error saying I didnt supply a key.
How to I add the correct nvida drivers to the install media?
Hardware via lspci;
$ lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #0 (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
00:1c.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #4 (rev f1)
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 VGA compatible controller: NVIDIA Corporation GP104M [GeForce GTX 1070 Mobile] (rev a1)
06:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)
0b:00.0 Ethernet controller: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller (rev 10)
Xorg.log
[ 136.260] (WW) Failed to open protocol names file /usr/lib64/xorg/protocol.txt
[ 136.260]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[ 136.260] X Protocol Version 11, Revision 0
[ 136.261] Build Operating System: 4.4.9-300.fc23.x86_64
[ 136.261] Current Operating System: Linux localhost 4.4.14-11.pvops.qubes.x86_64 #1 SMP Tue Jul 19 01:14:58 UTC 2016 x86_64
[ 136.261] Kernel command line: inst.stage2=hd:LABEL=Qubes-R3.2-x86_64 i915.preliminary_hw_support=1 quiet rhgb rd.live.check
[ 136.261] Build Date: 30 June 2016 11:04:38PM
[ 136.261] Build ID: xorg-x11-server 1.18.3-3.fc23
[ 136.261] Current version of pixman: 0.34.0
[ 136.261] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 136.261] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 136.261] (++) Log file: "/tmp/X.log", Time: Sat May 27 06:20:01 2017
[ 136.262] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 136.262] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 136.286] (==) No Layout section. Using the first Screen section.
[ 136.286] (==) No screen section available. Using defaults.
[ 136.286] (**) |-->Screen "Default Screen Section" (0)
[ 136.286] (**) | |-->Monitor "<default monitor>"
[ 136.292] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 136.292] (==) Automatically adding devices
[ 136.292] (==) Automatically enabling devices
[ 136.292] (==) Automatically adding GPU devices
[ 136.292] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 136.292] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 136.292] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 136.292] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 136.292] (II) Loader magic: 0x81ce00
[ 136.292] (II) Module ABI versions:
[ 136.292] X.Org ANSI C Emulation: 0.4
[ 136.292] X.Org Video Driver: 20.0
[ 136.292] X.Org XInput driver : 22.1
[ 136.292] X.Org Server Extension : 9.0
[ 136.292] (++) using VT number 6
[ 136.292] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 136.396] (--) PCI:*(0:1:0:0) 10de:1be1:1025:1131 rev 161, Mem @ 0x64000000/16777216, 0x50000000/268435456, 0x60000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 136.396] (II) LoadModule: "glx"
[ 136.397] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 136.426] (II) Module glx: vendor="X.Org Foundation"
[ 136.426] compiled for 1.18.3, module version = 1.0.0
[ 136.426] ABI class: X.Org Server Extension, version 9.0
[ 136.426] (==) AIGLX enabled
[ 136.426] (==) Matched nouveau as autoconfigured driver 0
[ 136.426] (==) Matched nv as autoconfigured driver 1
[ 136.426] (==) Matched modesetting as autoconfigured driver 2
[ 136.426] (==) Matched fbdev as autoconfigured driver 3
[ 136.426] (==) Matched vesa as autoconfigured driver 4
[ 136.426] (==) Assigned the driver to the xf86ConfigLayout
[ 136.426] (II) LoadModule: "nouveau"
[ 136.426] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 136.438] (II) Module nouveau: vendor="X.Org Foundation"
[ 136.438] compiled for 1.18.0, module version = 1.0.12
[ 136.438] Module class: X.Org Video Driver
[ 136.438] ABI class: X.Org Video Driver, version 20.0
[ 136.438] (II) LoadModule: "nv"
[ 136.439] (WW) Warning, couldn't open module nv
[ 136.439] (II) UnloadModule: "nv"
[ 136.439] (II) Unloading nv
[ 136.439] (EE) Failed to load module "nv" (module does not exist, 0)
[ 136.439] (II) LoadModule: "modesetting"
[ 136.439] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 136.452] (II) Module modesetting: vendor="X.Org Foundation"
[ 136.452] compiled for 1.18.3, module version = 1.18.3
[ 136.452] Module class: X.Org Video Driver
[ 136.452] ABI class: X.Org Video Driver, version 20.0
[ 136.452] (II) LoadModule: "fbdev"
[ 136.452] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 136.452] (II) Module fbdev: vendor="X.Org Foundation"
[ 136.452] compiled for 1.17.99.901, module version = 0.4.3
[ 136.452] Module class: X.Org Video Driver
[ 136.452] ABI class: X.Org Video Driver, version 20.0
[ 136.452] (II) LoadModule: "vesa"
[ 136.452] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 136.456] (II) Module vesa: vendor="X.Org Foundation"
[ 136.456] compiled for 1.17.99.901, module version = 2.3.2
[ 136.456] Module class: X.Org Video Driver
[ 136.456] ABI class: X.Org Video Driver, version 20.0
[ 136.456] (II) NOUVEAU driver
[ 136.456] (II) NOUVEAU driver for NVIDIA chipset families :
[ 136.456] RIVA TNT (NV04)
[ 136.456] RIVA TNT2 (NV05)
[ 136.456] GeForce 256 (NV10)
[ 136.456] GeForce 2 (NV11, NV15)
[ 136.456] GeForce 4MX (NV17, NV18)
[ 136.456] GeForce 3 (NV20)
[ 136.456] GeForce 4Ti (NV25, NV28)
[ 136.456] GeForce FX (NV3x)
[ 136.456] GeForce 6 (NV4x)
[ 136.456] GeForce 7 (G7x)
[ 136.456] GeForce 8 (G8x)
[ 136.456] GeForce GTX 200 (NVA0)
[ 136.456] GeForce GTX 400 (NVC0)
[ 136.456] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 136.456] (II) FBDEV: driver for framebuffer: fbdev
[ 136.456] (II) VESA: driver for VESA chipsets: vesa
[ 136.639] (EE) [drm] Failed to open DRM device for pci:0000:01:00.0: -19
[ 136.639] (EE) open /dev/dri/card0: No such file or directory
[ 136.639] (WW) Falling back to old probe method for modesetting
[ 136.639] (EE) open /dev/dri/card0: No such file or directory
[ 136.639] (II) Loading sub module "fbdevhw"
[ 136.639] (II) LoadModule: "fbdevhw"
[ 136.639] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 136.646] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 136.646] compiled for 1.18.3, module version = 0.0.2
[ 136.646] ABI class: X.Org Video Driver, version 20.0
[ 136.646] (EE) open /dev/fb0: No such file or directory
[ 136.646] (WW) Falling back to old probe method for fbdev
[ 136.646] (II) Loading sub module "fbdevhw"
[ 136.646] (II) LoadModule: "fbdevhw"
[ 136.647] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 136.647] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 136.647] compiled for 1.18.3, module version = 0.0.2
[ 136.647] ABI class: X.Org Video Driver, version 20.0
[ 136.647] (EE) open /dev/fb0: No such file or directory
[ 136.647] (EE) Screen 0 deleted because of no matching config section.
[ 136.647] (II) UnloadModule: "modesetting"
[ 136.647] (EE) Screen 0 deleted because of no matching config section.
[ 136.647] (II) UnloadModule: "fbdev"
[ 136.647] (II) UnloadSubModule: "fbdevhw"
[ 136.647] (II) Loading sub module "vbe"
[ 136.647] (II) LoadModule: "vbe"
[ 136.647] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 136.658] (II) Module vbe: vendor="X.Org Foundation"
[ 136.658] compiled for 1.18.3, module version = 1.1.0
[ 136.658] ABI class: X.Org Video Driver, version 20.0
[ 136.658] (II) Loading sub module "int10"
[ 136.658] (II) LoadModule: "int10"
[ 136.658] (II) Loading /usr/lib64/xorg/modules/libint10.so
[ 136.663] (II) Module int10: vendor="X.Org Foundation"
[ 136.663] compiled for 1.18.3, module version = 1.0.0
[ 136.663] ABI class: X.Org Video Driver, version 20.0
[ 136.663] (II) VESA(0): initializing int10
[ 136.667] (EE) VESA(0): V_BIOS address 0x0 out of range
[ 136.667] (II) UnloadModule: "vesa"
[ 136.667] (II) UnloadSubModule: "int10"
[ 136.667] (II) Unloading int10
[ 136.667] (II) UnloadSubModule: "vbe"
[ 136.667] (II) Unloading vbe
[ 136.667] (EE) Screen(s) found, but none have a usable configuration.
[ 136.667] (EE)
Fatal server error:
[ 136.667] (EE) no screens found(EE)
[ 136.667] (EE)
Please consult the Fedora Project support
at http://wiki.x.org
for help.
[ 136.667] (EE) Please also check the log file at "/tmp/X.log" for additional information.
[ 136.667] (EE)
[ 136.669] (EE) Server terminated with error (1). Closing log file.