mce: Unable to init device /dev/mcelog (rc: -16)

[raah...@gmail.com]

I get this message at boot. Should i update kernel or just ignore it? I haven't noticed any issues. Only issue I have had is I had firefox open in a untrusted domain, the vm froze and vm manager was telling me it refused to give back memory, so I killed it, then restarted it. I then had no network connection and noticed I wasn't connected to the network anymore and it was showing a new network. Intstead of "wired network" in network manager it had a connection enp0s0, so what I did was just clicked back on wired connection and deleted the enp0s0 connection to restore my network. Not sure if this is related to the boot error at all.

mce: CPU supports 2 MCE banks
mce: Unable to init device /dev/mcelog (rc: -16)
mceelog: AMD Processor family 16: Please load edac_mce_amd module.
systemd[1]: Unit mcelog.service entered failed state
mcelog.setup: CPU is unsupported
mcelog: mcelog: AMD Processor family 16: Please load edac_mce_amd module.
mcelog: Success
mcelog: CPU is unsupported

Thanks in advance for your replies.

Rich.

[raah...@gmail.com]

seems i can ignore the error

https://bugzilla.redhat.com/show_bug.cgi?id=1069652

[Flipe Fr]

No you cannot ignore the error, the kernel 4.1, just updated yesterday using qubes-dom0-update block the boot up of my system, I am using a AMD graphic card,(HP Pavillion g6 2004ss)

[Flipe Fr]

[raah...@gmail.com]

On Thursday, November 19, 2015 at 2:59:54 PM UTC-5, Flipe Fr wrote:
> No you cannot ignore the error, the kernel 4.1, just updated yesterday using qubes-dom0-update block the boot up of my system, I am using a AMD graphic card,(HP Pavillion g6 2004ss)

Hey felipe i just upgraded my qubes 3.0 to 3.1 and started to get the error again saw your post here when referring back to the thread. Sorry for not replying earlier.

I don't really think it is the issue that is stopping you from booting the qbues, it probably has something else to do with the 4.1 kernel and your specific hardware. Because that mcelog message is just a warning that mcelog is not working. It doesn't refer to any real hardware error. So far i haven't had any other issues, even sleep is working fine for me still in the new qubes and they seem to have fix the problem with network setting changing on wake.

So like the fedora thread says as long as you make sure your edac_mce_amd module is loaded, you can safely disable mcelog service which only work on intel systems.

List your full hardware specs, also have you tried to use a diff kernel, maybe downgrade it?

[raah...@gmail.com]

on another note I stopped using fedora on an old ancient duo core laptop because of an annoying scary "failed to find device cpu0" message on boot, which started with the 4.x kernels(also happens with arch), that i was promised would be fixed by 4.2 but never was. So the first day my cpu didn't boot, without even trying to figure out why i just removed fedora lxde and installed lubuntu wily iso instead and their 4.2 kernel doesn't have the issue.

[Flipe Fr]

=================================================================================

I guess I can ignore the error, in the Fedora bugzilla they thought I was crazy, anyway, I am using currently kernel 3.19.8-100.fc200.x86_64 (writing from there) here is my specifications (all the info is coming from Dom0):

According with KInfoCenter:

Brand and model: HP Pavillion g6 2004ss
Hard disk: SATA 320.1 GB, Hitachi HTS543232A7A384
PCI:
-Realtek Semiconductor Co., Ltd RTS5229 PCI Express Card Reader
-Realtek Semiconductor Co., Ltd RTL81010E/RTL8102E PCI Express Fast Ethernet controller
-Ralink corp. Device 539a
-Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller
-Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
-Intel Corporation HM76 Express Chipset LPC Controller
-Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1
-Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3
-Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2
-Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1
-Intel Corporation 7 Series/C210 Series Chipset Family High DefinitionAudio Controller
-Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2
-Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1
-Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller
-Intel Corporation 3rd Gen Core processir Graphics Controller
-Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port
-Intel Corporation 3rd Gen Core processor DRAM Controller
SCSI:
Host:scsi0 Channel: 00 ld: 00 Lun: 00
    Vendor: ATA     Model: Hitachi HTS54323 Rev: A60W
    Type:    Direct-Access       ANSI  SCSI revision: 05
Host:  scsi4 Channel: 00 ld: 00 Lun: 00
    Vendor: hp       Model: DVD-RAM UJ8B1    Rev: H.04
     Type:   CD-ROM           ANSI   SCSI  revision:  05


Commands in the shell:

lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (rev ff)
07:00.0 Network controller: Ralink corp. Device 539a
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
[flipefr@dom0]~% ps -fea | grep debian-sid
flipefr   2929  2895  0 19:29 pts/4    00:00:00 grep --color=auto debian-sid
[flipefr@dom0]~% lsusb
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

sudo biosdecode
# biosdecode 2.12
ACPI 2.0 present.
        OEM Identifier: HPQOEM
        RSD Table 32-bit Address: 0x3AFFE124
        XSD Table 64-bit Address: 0x000000003AFFE210
PNP BIOS 1.0 present.
        Event Notification: Not Supported
        Real Mode 16-bit Code Address: F000:B766
        Real Mode 16-bit Data Address: 0040:0000
        16-bit Protected Mode Code Address: 0x000FB771
                                                                                                                               1,1           Top


Hope this help, at least you had some fun reading all my hardware.

Thanks

[Flipe Fr]

El jueves, 10 de diciembre de 2015, 21:11:36 (UTC), Flipe Fr escribió:

El jueves, 10 de diciembre de 2015, 19:01:46 (UTC), raah...@gmail.com escribió:On Thursday, November 19, 2015 at 2:59:54 PM UTC-5, Flipe Fr wrote:
> No you cannot ignore the error, the kernel 4.1, just updated yesterday using qubes-dom0-update block the boot up of my system, I am using a AMD graphic card,(HP Pavillion g6 2004ss)

Hey felipe i just upgraded my qubes 3.0 to 3.1 and started to get the error again saw your post here when referring back to the thread. Sorry for not replying earlier.

I don't really think it is the issue that is stopping you from booting the qbues, it probably has something else to do with the 4.1 kernel and your specific hardware. Because that mcelog message is just a warning that mcelog is not working.  It doesn't refer to any real hardware error.  So far i haven't had any other issues,  even sleep is working fine for me still in the new qubes and they seem to have fix the problem with network setting changing on wake.

So like the fedora thread says as long as you make sure your edac_mce_amd module is loaded,  you can safely disable mcelog service which only work on intel systems.

List your full hardware specs,  also have you tried to use a diff kernel, maybe downgrade it?  

=================================================================================

This is the complete answer, Google cut it on the first time:
 

    16-bit Protected Mode Data Address: 0x00000400
    OEM Device Identifier: SST2400
SMBIOS 2.7 present.
    Structure Table Length: 1941 bytes
    Structure Table Address: 0x000E6D40
    Number Of Structures: 36
    Maximum Structure Size: 220 bytes
BIOS32 Service Directory present.
    Revision: 0
    Calling Interface Address: 0x000EF725
PCI Interrupt Routing 1.0 present.
    Router ID: 00:1f.0
    Exclusive IRQs: None
    Compatible Router: 8086:122e
    Slot Entry 1: ID 01:00, on-board
    Slot Entry 2: ID 00:01, on-board
    Slot Entry 3: ID 00:02, on-board
    Slot Entry 4: ID 00:04, on-board
    Slot Entry 5: ID 00:06, on-board
    Slot Entry 6: ID 07:00, on-board
    Slot Entry 7: ID 08:00, on-board
    Slot Entry 8: ID 09:00, on-board
    Slot Entry 9: ID 00:16, on-board
    Slot Entry 10: ID 00:18, on-board
    Slot Entry 11: ID 00:19, on-board
    Slot Entry 12: ID 00:1a, on-board
    Slot Entry 13: ID 00:1b, on-board
    Slot Entry 14: ID 00:1c, on-board
    Slot Entry 15: ID 00:1d, on-board
    Slot Entry 16: ID 00:1f, on-board

lsusb
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

sudo dmidecode
# dmidecode 2.12
SMBIOS 2.7 present.
36 structures occupying 1941 bytes.
Table at 0x000E6D40.

Handle 0x0000, DMI type 16, 23 bytes
Physical Memory Array
    Location: System Board Or Motherboard
    Use: System Memory
    Error Correction Type: None
    Maximum Capacity: 16 GB
    Error Information Handle: Not Provided
    Number Of Devices: 2

Handle 0x0001, DMI type 17, 34 bytes
Memory Device
    Array Handle: 0x0000
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 2048 MB
    Form Factor: SODIMM
    Set: None
    Locator: Bottom-Slot 1(top)
    Bank Locator: BANK 0
    Type: DDR3
    Type Detail: Synchronous
    Speed: 1600 MHz
    Manufacturer: Hynix
    Serial Number: 5992EDBD
    Asset Tag: Unknown
    Part Number: HMT325S6CFR8C-PB 
    Rank: 1
    Configured Clock Speed: 1600 MHz

Handle 0x0003, DMI type 20, 35 bytes
Memory Device Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x0007FFFFFFF
    Range Size: 2 GB
    Physical Device Handle: 0x0001
    Memory Array Mapped Address Handle: 0x0007
    Partition Row Position: 1
    Interleave Position: 1
    Interleaved Data Depth: 1

Handle 0x0004, DMI type 17, 34 bytes
Memory Device
    Array Handle: 0x0000
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 4096 MB
    Form Factor: SODIMM
    Set: None
    Locator: Bottom-Slot 2(under)
    Bank Locator: BANK 1
    Type: DDR3
    Type Detail: Synchronous
    Speed: 1600 MHz
    Manufacturer: Samsung
    Serial Number: 0087C79B
    Asset Tag: Unknown
    Part Number: M471B5273DH0-CK0 
    Rank: 2
    Configured Clock Speed: 1600 MHz

Handle 0x0006, DMI type 20, 35 bytes
Memory Device Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x000FFFFFFFF
    Range Size: 4 GB
    Physical Device Handle: 0x0004
    Memory Array Mapped Address Handle: 0x0007
    Partition Row Position: 1
    Interleave Position: 2
    Interleaved Data Depth: 1

Handle 0x0007, DMI type 19, 31 bytes
Memory Array Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x0017FFFFFFF
    Range Size: 6 GB
    Physical Array Handle: 0x0000
    Partition Width: 2

Handle 0x0009, DMI type 0, 24 bytes
BIOS Information
    Vendor: Insyde
    Version: F.22
    Release Date: 11/22/2012
    Address: 0xE0000
    Runtime Size: 128 kB
    ROM Size: 2560 kB
    Characteristics:
        PCI is supported
        BIOS is upgradeable
        BIOS shadowing is allowed
        Boot from CD is supported
        Selectable boot is supported
        EDD is supported
        Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
        Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
        5.25"/360 kB floppy services are supported (int 13h)
        5.25"/1.2 MB floppy services are supported (int 13h)
        3.5"/720 kB floppy services are supported (int 13h)
        3.5"/2.88 MB floppy services are supported (int 13h)
        8042 keyboard services are supported (int 9h)
        CGA/mono video services are supported (int 10h)
        ACPI is supported
        USB legacy is supported
        BIOS boot specification is supported
        Targeted content distribution is supported
        UEFI is supported
    BIOS Revision: 15.34
    Firmware Revision: 56.50

Handle 0x000A, DMI type 1, 27 bytes
System Information
    Manufacturer: Hewlett-Packard
    Product Name: HP Pavilion g6 Notebook PC
    Version: 0791100000205610000620100
    Serial Number: 5CD2203TJF
    UUID: 32444335-3032-5433-4A46-A0B3CC7793CD
    Wake-up Type: Power Switch
    SKU Number: B3K67EA#ABE
    Family: 103C_5335KV G=N L=CON B=HP S=PAV X=Null

Handle 0x000B, DMI type 2, 16 bytes
Base Board Information
    Manufacturer: Hewlett-Packard
    Product Name: 183E
    Version: 56.32
    Serial Number: PCSCN012C1UL4H
    Asset Tag: Type2 - Board Asset Tag
    Features:
        Board is a hosting board
        Board is replaceable
    Location In Chassis: Type2 - Board Chassis Location
    Chassis Handle: 0x000C
    Type: Motherboard
    Contained Object Handles: 0

Handle 0x000C, DMI type 3, 23 bytes
Chassis Information
    Manufacturer: Hewlett-Packard
    Type: Notebook
    Lock: Not Present
    Version: Chassis Version
    Serial Number: Chassis Serial Number
    Asset Tag: Not Specified
    Boot-up State: Safe
    Power Supply State: Safe
    Thermal State: Safe
    Security Status: None
    OEM Information: 0x00000956
    Height: Unspecified
    Number Of Power Cords: 1
    Contained Elements: 0
    SKU Number: Not Specified

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN3002
    Internal Connector Type: None
    External Reference Designator: USB
    External Connector Type: Access Bus (USB)
    Port Type: USB

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN3003
    Internal Connector Type: None
    External Reference Designator: USB
    External Connector Type: Access Bus (USB)
    Port Type: USB

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN3004
    Internal Connector Type: None
    External Reference Designator: USB
    External Connector Type: Access Bus (USB)
    Port Type: USB

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN4000
    Internal Connector Type: None
    External Reference Designator: Network
    External Connector Type: RJ-45
    Port Type: Network Port

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN5003
    Internal Connector Type: None
    External Reference Designator: HDMI
    External Connector Type: Other
    Port Type: Video Port

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN5001
    Internal Connector Type: None
    External Reference Designator: CRT
    External Connector Type: DB-15 female
    Port Type: Video Port

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN3005
    Internal Connector Type: None
    External Reference Designator: Microphone In
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
    Internal Reference Designator: CN3000
    Internal Connector Type: None
    External Reference Designator: Speaker Out
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port

Handle 0x0015, DMI type 9, 17 bytes
System Slot Information
    Designation: PCI Express Slot 1
    Type: x16 PCI Express x16
    Current Usage: Available
    Length: Other
    ID: 1
    Characteristics:
        PME signal is supported
        Hot-plug devices are supported
    Bus Address: 0000:00:01.0

Handle 0x0016, DMI type 9, 17 bytes
System Slot Information
    Designation: PCI Express Slot 2
    Type: x1 PCI Express x1
    Current Usage: Available
    Length: Other
    ID: 1
    Characteristics:
        5.0 V is provided
        3.3 V is provided
        PME signal is supported
    Bus Address: 0000:00:1c.0

Handle 0x0017, DMI type 9, 17 bytes
System Slot Information
    Designation: PCI Express Slot 3
    Type: x1 PCI Express x1
    Current Usage: Available
    Length: Other
    ID: 2
    Characteristics:
        5.0 V is provided
        3.3 V is provided
    Bus Address: 0000:00:1c.1

Handle 0x0018, DMI type 11, 5 bytes
OEM Strings
    String 1: $HP$
    String 2: LOC#ABE
    String 3: ABS 70/71 78 79 7A 7B
    String 4: CNB1 0791100000205610000620100
    String 5: HP_Mute_LED_0_A
    String 6: String6 for Original Equipment Manufacturer
    String 7: String7 for Original Equipment Manufacturer
    String 8: String8 for Original Equipment Manufacturer

Handle 0x0019, DMI type 13, 22 bytes
BIOS Language Information
    Language Description Format: Long
    Installable Languages: 4
        en|US|iso8859-1
        fr|CA|iso8859-1
        es|ES|iso8859-1
        zh|TW|unicode
    Currently Installed Language: es|ES|iso8859-1

Handle 0x001A, DMI type 24, 5 bytes
Hardware Security
    Power-On Password Status: Disabled
    Keyboard Password Status: Disabled
    Administrator Password Status: Disabled
    Front Panel Reset Status: Disabled

Handle 0x001B, DMI type 32, 20 bytes
System Boot Information
    Status: No errors detected

Handle 0x001C, DMI type 41, 11 bytes
Onboard Device
    Reference Designation: Radeon HD 7670M
    Type: Video
    Status: Enabled
    Type Instance: 1
    Bus Address: 0000:01:00.0

Handle 0x001D, DMI type 131, 64 bytes
OEM-specific Type
    Header and Data:
        83 40 1D 00 31 00 00 00 00 00 00 00 00 00 00 00
        F8 00 59 1E FF FF FF FF 01 20 00 00 00 00 08 00
        82 05 02 00 00 00 00 00 C8 00 FF FF 00 00 00 00
        00 FF 00 00 66 00 00 00 76 50 72 6F 00 00 00 00

Handle 0x001E, DMI type 41, 11 bytes
Onboard Device
    Reference Designation: Intel(R) Graphics 4000
    Type: Video
    Status: Enabled
    Type Instance: 1
    Bus Address: 0000:00:02.0

Handle 0x001F, DMI type 41, 11 bytes
Onboard Device
    Reference Designation: Ralink WLAN Ralink Ripple3 RT5390F_802.11 b/g/n 1x1 PCIe HMC
    Type: Other
    Status: Enabled
    Type Instance: 1
    Bus Address: 0000:07:00.0

Handle 0x0020, DMI type 41, 11 bytes
Onboard Device
    Reference Designation: Realtek PCIe FE Family Controller
    Type: Ethernet
    Status: Enabled
    Type Instance: 1
    Bus Address: 0000:08:00.0

Handle 0x0021, DMI type 4, 42 bytes
Processor Information
    Socket Designation: U3E1
    Type: Central Processor
    Family: Core i7
    Manufacturer: Intel(R) Corporation
    ID: A9 06 03 00 FF FB EB BF
    Signature: Type 0, Family 6, Model 58, Stepping 9
    Flags:
        FPU (Floating-point unit on-chip)
        VME (Virtual mode extension)
        DE (Debugging extension)
        PSE (Page size extension)
        TSC (Time stamp counter)
        MSR (Model specific registers)
        PAE (Physical address extension)
        MCE (Machine check exception)
        CX8 (CMPXCHG8 instruction supported)
        APIC (On-chip APIC hardware supported)
        SEP (Fast system call)
        MTRR (Memory type range registers)
        PGE (Page global enable)
        MCA (Machine check architecture)
        CMOV (Conditional move instruction supported)
        PAT (Page attribute table)
        PSE-36 (36-bit page size extension)
        CLFSH (CLFLUSH instruction supported)
        DS (Debug store)
        ACPI (ACPI supported)
        MMX (MMX technology supported)
        FXSR (FXSAVE and FXSTOR instructions supported)
        SSE (Streaming SIMD extensions)
        SSE2 (Streaming SIMD extensions 2)
        SS (Self-snoop)
        HTT (Multi-threading)
        TM (Thermal monitor supported)
        PBE (Pending break enabled)
    Version: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz
    Voltage: 0.9 V
    External Clock: 100 MHz
    Max Speed: 4000 MHz
    Current Speed: 2100 MHz
    Status: Populated, Enabled
    Upgrade: Socket rPGA988B
    L1 Cache Handle: 0x0023
    L2 Cache Handle: 0x0024
    L3 Cache Handle: 0x0025
    Serial Number: To Be Filled By O.E.M.
    Asset Tag: To Be Filled By O.E.M.
    Part Number: To Be Filled By O.E.M.
    Core Count: 4
    Core Enabled: 4
    Thread Count: 8
    Characteristics:
        64-bit capable
        Multi-Core
        Hardware Thread
        Execute Protection
        Enhanced Virtualization
        Power/Performance Control

Handle 0x0022, DMI type 7, 19 bytes
Cache Information
    Socket Designation: L1 Cache
    Configuration: Enabled, Not Socketed, Level 1
    Operational Mode: Write Through
    Location: Internal
    Installed Size: 32 kB
    Maximum Size: 32 kB
    Supported SRAM Types:
        Unknown
    Installed SRAM Type: Unknown
    Speed: Unknown
    Error Correction Type: Parity
    System Type: Data
    Associativity: 8-way Set-associative

Handle 0x0023, DMI type 7, 19 bytes
Cache Information
    Socket Designation: L1 Cache
    Configuration: Enabled, Not Socketed, Level 1
    Operational Mode: Write Through
    Location: Internal
    Installed Size: 32 kB
    Maximum Size: 32 kB
    Supported SRAM Types:
        Unknown
    Installed SRAM Type: Unknown
    Speed: Unknown
    Error Correction Type: Parity
    System Type: Instruction
    Associativity: 8-way Set-associative

Handle 0x0024, DMI type 7, 19 bytes
Cache Information
    Socket Designation: L2 Cache
    Configuration: Enabled, Not Socketed, Level 2
    Operational Mode: Write Through
    Location: Internal
    Installed Size: 256 kB
    Maximum Size: 256 kB
    Supported SRAM Types:
        Unknown
    Installed SRAM Type: Unknown
    Speed: Unknown
    Error Correction Type: Multi-bit ECC
    System Type: Unified
    Associativity: 8-way Set-associative

Handle 0x0025, DMI type 7, 19 bytes
Cache Information
    Socket Designation: L3 Cache
    Configuration: Enabled, Not Socketed, Level 3
    Operational Mode: Write Back
    Location: Internal
    Installed Size: 6144 kB
    Maximum Size: 6144 kB
    Supported SRAM Types:
        Unknown
    Installed SRAM Type: Unknown
    Speed: Unknown
    Error Correction Type: Multi-bit ECC
    System Type: Unified
    Associativity: 12-way Set-associative

Handle 0x0026, DMI type 127, 4 bytes
End Of Table


sudo cat /proc/meminfo
MemTotal:        4290880 kB
MemFree:           56796 kB
MemAvailable:    3309576 kB
Buffers:              92 kB
Cached:          3582928 kB
SwapCached:         1312 kB
Active:          1990036 kB
Inactive:        1990240 kB
Active(anon):     369296 kB
Inactive(anon):   400496 kB
Active(file):    1620740 kB
Inactive(file):  1589744 kB
Unevictable:         176 kB
Mlocked:             176 kB
SwapTotal:       5912572 kB
SwapFree:        5872444 kB
Dirty:             13080 kB
Writeback:             0 kB
AnonPages:        396464 kB
Mapped:           200560 kB
Shmem:            372552 kB
Slab:             120208 kB
SReclaimable:      78296 kB
SUnreclaim:        41912 kB
KernelStack:        7616 kB
PageTables:        25300 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:     8058012 kB
Committed_AS:    1833024 kB
VmallocTotal:   34359738367 kB
VmallocUsed:      598780 kB
VmallocChunk:   34359125588 kB
HardwareCorrupted:     0 kB
AnonHugePages:         0 kB
HugePages_Total:       0
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
DirectMap4k:     6187776 kB
DirectMap2M:           0 kB


sudo lshw
dom0                     
    description: Notebook
    product: HP Pavilion g6 Notebook PC (B3K67EA#ABE)
    vendor: Hewlett-Packard
    version: 0791100000205610000620100
    serial: 5CD2203TJF
    width: 64 bits
    capabilities: smbios-2.7 dmi-2.7 vsyscall32
    configuration: administrator_password=disabled boot=normal chassis=notebook family=103C_5335KV G=N L=CON B=HP S=PAV X=Null frontpanel_password=disabled keyboard_password=disabled power-on_password=disabled sku=B3K67EA#ABE uuid=35434432-3230-3354-4A46-A0B3CC7793CD
  *-core
       description: Motherboard
       product: 183E
       vendor: Hewlett-Packard
       physical id: 0
       version: 56.32
       serial: PCSCN012C1UL4H
       slot: Type2 - Board Chassis Location
     *-memory
          description: System Memory
          physical id: 0
          slot: System board or motherboard
          size: 6GiB
        *-bank:0
             description: SODIMM DDR3 Synchronous 1600 MHz (0,6 ns)
             product: HMT325S6CFR8C-PB
             vendor: Hynix
             physical id: 0
             serial: 5992EDBD
             slot: Bottom-Slot 1(top)
             size: 2GiB
             width: 64 bits
             clock: 1600MHz (0.6ns)
        *-bank:1
             description: SODIMM DDR3 Synchronous 1600 MHz (0,6 ns)
             product: M471B5273DH0-CK0
             vendor: Samsung
             physical id: 1
             serial: 0087C79B
             slot: Bottom-Slot 2(under)
             size: 4GiB
             width: 64 bits
             clock: 1600MHz (0.6ns)
     *-firmware
          description: BIOS
          vendor: Insyde
          physical id: 9
          version: F.22
          date: 11/22/2012
          size: 128KiB
          capacity: 2496KiB
          capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification uefi
     *-cpu
          description: CPU
          product: Core i7 (To Be Filled By O.E.M.)
          vendor: Intel Corp.
          physical id: 21
          bus info: cpu@0
          version: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz
          serial: To Be Filled By O.E.M.
          slot: U3E1
          size: 2100MHz
          capacity: 4GHz
          width: 64 bits
          clock: 100MHz
          capabilities: x86-64 fpu fpu_exception wp de tsc msr pae mce cx8 apic sep mca cmov pat clflush acpi mmx fxsr sse sse2 ss ht syscall nx constant_tsc rep_good nopl nonstop_tsc eagerfpu pni pclmulqdq monitor est ssse3 cx16 sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm ida arat epb pln pts dtherm fsgsbase erms xsaveopt
          configuration: cores=4 enabledcores=4 threads=8
        *-cache:0
             description: L1 cache
             physical id: 23
             slot: L1 Cache
             size: 32KiB
             capacity: 32KiB
             capabilities: internal write-through instruction
        *-cache:1
             description: L2 cache
             physical id: 24
             slot: L2 Cache
             size: 256KiB
             capacity: 256KiB
             capabilities: internal write-through unified
        *-cache:2
             description: L3 cache
             physical id: 25
             slot: L3 Cache
             size: 6MiB
             capacity: 6MiB
             capabilities: internal write-back unified
     *-cache
          description: L1 cache
          physical id: 22
          slot: L1 Cache
          size: 32KiB
          capacity: 32KiB
          capabilities: internal write-through data
     *-pci
          description: Host bridge
          product: 3rd Gen Core processor DRAM Controller
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 09
          width: 32 bits
          clock: 33MHz
        *-pci:0
             description: PCI bridge
             product: Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port
             vendor: Intel Corporation
             physical id: 1
             bus info: pci@0000:00:01.0
             version: 09
             width: 32 bits
             clock: 33MHz
             capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:74 ioport:4000(size=4096) memory:62000000-62ffffff ioport:40000000(size=268435456)
           *-generic
                description: Unassigned class
                product: Illegal Vendor ID
                vendor: Illegal Vendor ID
                physical id: 0
                bus info: pci@0000:01:00.0
                version: ff
                width: 32 bits
                clock: 66MHz
                capabilities: bus_master vga_palette cap_list rom
                configuration: driver=radeon latency=255 maxlatency=255 mingnt=255
                resources: irq:79 memory:40000000-4fffffff memory:62000000-6201ffff ioport:4000(size=256) memory:62020000-6203ffff
        *-display
             description: VGA compatible controller
             product: 3rd Gen Core processor Graphics Controller
             vendor: Intel Corporation
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 09
             width: 64 bits
             clock: 33MHz
             capabilities: msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             resources: irq:78 memory:63000000-633fffff memory:50000000-5fffffff ioport:5000(size=64)
        *-usb:0
             description: USB controller
             product: 7 Series/C210 Series Chipset Family USB xHCI Host Controller
             vendor: Intel Corporation
             physical id: 14
             bus info: pci@0000:00:14.0
             version: 04
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi xhci bus_master cap_list
             configuration: driver=xhci_hcd latency=0
             resources: irq:77 memory:63600000-6360ffff
           *-usbhost:0
                product: xHCI Host Controller
                vendor: Linux 3.19.8-100.fc20.x86_64 xhci-hcd
                physical id: 0
                bus info: usb@2
                logical name: usb2
                version: 3.19
                capabilities: usb-3.00
                configuration: driver=hub slots=4 speed=5000Mbit/s
           *-usbhost:1
                product: xHCI Host Controller
                vendor: Linux 3.19.8-100.fc20.x86_64 xhci-hcd
                physical id: 1
                bus info: usb@1
                logical name: usb1
                version: 3.19
                capabilities: usb-2.00
                configuration: driver=hub slots=4 speed=480Mbit/s
              *-usb
                   description: Mouse
                   product: USB Optical Mouse
                   vendor: PixArt
                   physical id: 1
                   bus info: usb@1:1
                   version: 1.00
                   capabilities: usb-1.10
                   configuration: driver=usbhid maxpower=100mA speed=1Mbit/s
        *-communication
             description: Communication controller
             product: 7 Series/C210 Series Chipset Family MEI Controller #1
             vendor: Intel Corporation
             physical id: 16
             bus info: pci@0000:00:16.0
             version: 04
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=mei_me latency=0
             resources: irq:80 memory:63614000-6361400f
        *-usb:1
             description: USB controller
             product: 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2
             vendor: Intel Corporation
             physical id: 1a
             bus info: pci@0000:00:1a.0
             version: 04
             width: 32 bits
             clock: 33MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=0
             resources: irq:16 memory:63619000-636193ff
           *-usbhost
                product: EHCI Host Controller
                vendor: Linux 3.19.8-100.fc20.x86_64 ehci_hcd
                physical id: 1
                bus info: usb@3
                logical name: usb3
                version: 3.19
                capabilities: usb-2.00
                configuration: driver=hub slots=2 speed=480Mbit/s
              *-usb
                   description: USB hub
                   product: Integrated Rate Matching Hub
                   vendor: Intel Corp.
                   physical id: 1
                   bus info: usb@3:1
                   version: 0.00
                   capabilities: usb-2.00
                   configuration: driver=hub slots=6 speed=480Mbit/s
        *-multimedia
             description: Audio device
             product: 7 Series/C210 Series Chipset Family High Definition Audio Controller
             vendor: Intel Corporation
             physical id: 1b
             bus info: pci@0000:00:1b.0
             version: 04
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi pciexpress bus_master cap_list
             configuration: driver=snd_hda_intel latency=0
             resources: irq:82 memory:63610000-63613fff
        *-pci:1
             description: PCI bridge
             product: 7 Series/C210 Series Chipset Family PCI Express Root Port 1
             vendor: Intel Corporation
             physical id: 1c
             bus info: pci@0000:00:1c.0
             version: c4
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:17 memory:63500000-635fffff
           *-network
                description: Network controller
                product: Ralink corp.
                vendor: Ralink corp.
                physical id: 0
                bus info: pci@0000:07:00.0
                version: 00
                width: 32 bits
                clock: 33MHz
                capabilities: pm msi pciexpress bus_master cap_list
                configuration: driver=pciback latency=0
                resources: irq:16 memory:63500000-6350ffff
        *-pci:2
             description: PCI bridge
             product: 7 Series/C210 Series Chipset Family PCI Express Root Port 2
             vendor: Intel Corporation
             physical id: 1c.1
             bus info: pci@0000:00:1c.1
             version: c4
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:16 ioport:3000(size=4096) ioport:63400000(size=1048576)
           *-network
                description: Ethernet controller
                product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 0
                bus info: pci@0000:08:00.0
                version: 05
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress msix vpd bus_master cap_list
                configuration: driver=pciback latency=0
                resources: irq:94 ioport:3000(size=256) memory:63404000-63404fff memory:63400000-63403fff
        *-pci:3
             description: PCI bridge
             product: 7 Series/C210 Series Chipset Family PCI Express Root Port 3
             vendor: Intel Corporation
             physical id: 1c.2
             bus info: pci@0000:00:1c.2
             version: c4
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:18 ioport:2000(size=4096) memory:61000000-61ffffff ioport:60000000(size=16777216)
           *-generic
                description: Unassigned class
                product: RTS5229 PCI Express Card Reader
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 0
                bus info: pci@0000:09:00.0
                version: 01
                width: 32 bits
                clock: 33MHz
                capabilities: pm msi pciexpress bus_master cap_list
                configuration: driver=rtsx_pci latency=0
                resources: irq:81 memory:61000000-61000fff
        *-usb:2
             description: USB controller
             product: 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1
             vendor: Intel Corporation
             physical id: 1d
             bus info: pci@0000:00:1d.0
             version: 04
             width: 32 bits
             clock: 33MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=pciback latency=0
             resources: irq:20 memory:63618000-636183ff
        *-isa
             description: ISA bridge
             product: HM76 Express Chipset LPC Controller
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 04
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master cap_list
             configuration: driver=lpc_ich latency=0
             resources: irq:0
        *-storage
             description: SATA controller
             product: 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@0000:00:1f.2
             version: 04
             width: 32 bits
             clock: 66MHz
             capabilities: storage msi pm ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             resources: irq:76 ioport:5088(size=8) ioport:5094(size=4) ioport:5080(size=8) ioport:5090(size=4) ioport:5060(size=32) memory:63617000-636177ff
        *-serial UNCLAIMED
             description: SMBus
             product: 7 Series/C210 Series Chipset Family SMBus Controller
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             version: 04
             width: 64 bits
             clock: 33MHz
             configuration: latency=0
             resources: memory:63615000-636150ff ioport:5040(size=32)
     *-scsi:0
          physical id: 1
          logical name: scsi0
          capabilities: emulated
        *-disk
             description: ATA Disk
             product: Hitachi HTS54323
             vendor: Hitachi
             physical id: 0.0.0
             bus info: scsi@0:0.0.0
             logical name: /dev/sda
             version: A60W
             serial: E203421K3E8X5M
             size: 298GiB (320GB)
             capabilities: partitioned partitioned:dos
             configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=f74ceea6
           *-volume:0
                description: Windows NTFS volume
                physical id: 1
                bus info: scsi@0:0.0.0,1
                logical name: /dev/sda1
                version: 3.1
                serial: a615-fc67
                size: 98MiB
                capacity: 100MiB
                capabilities: primary bootable ntfs initialized
                configuration: clustersize=4096 created=2015-11-10 19:14:55 filesystem=ntfs label=Reservado para el sistema state=clean
           *-volume:1
                description: Windows NTFS volume
                physical id: 2
                bus info: scsi@0:0.0.0,2
                logical name: /dev/sda2
                version: 3.1
                serial: daeb88de-689e-2b4a-bf6e-0b1edb84b3ec
                size: 99GiB
                capacity: 99GiB
                capabilities: primary ntfs initialized
                configuration: clustersize=4096 created=2015-11-10 19:15:05 filesystem=ntfs state=clean
           *-volume:2
                description: EXT4 volume
                vendor: Linux
                physical id: 3
                bus info: scsi@0:0.0.0,3
                logical name: /dev/sda3
                logical name: /boot
                version: 1.0
                serial: 35d9b4f8-060a-4cbc-81a8-d0c749141a56
                size: 500MiB
                capacity: 500MiB
                capabilities: primary journaled extended_attributes huge_files dir_nlink recover extents ext4 ext2 initialized
                configuration: created=2015-11-10 20:39:02 filesystem=ext4 lastmountpoint=/boot modified=2015-12-10 18:41:39 mount.fstype=ext4 mount.options=rw,relatime,data=ordered mounted=2015-12-10 18:41:39 state=mounted
           *-volume:3
                description: Extended partition
                physical id: 4
                bus info: scsi@0:0.0.0,4
                logical name: /dev/sda4
                size: 197GiB
                capacity: 197GiB
                capabilities: primary extended partitioned partitioned:extended
              *-logicalvolume:0
                   description: Linux filesystem partition
                   physical id: 5
                   logical name: /dev/sda5
                   capacity: 5776MiB
              *-logicalvolume:1
                   description: Linux filesystem partition
                   physical id: 6
                   logical name: /dev/sda6
                   capacity: 191GiB
     *-scsi:1
          physical id: 2
          logical name: scsi4
          capabilities: emulated
        *-cdrom
             description: DVD-RAM writer
             product: DVD-RAM UJ8B1
             vendor: hp
             physical id: 0.0.0
             bus info: scsi@4:0.0.0
             logical name: /dev/cdrom
             logical name: /dev/sr0
             version: H.04
             capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
             configuration: ansiversion=5 status=nodisc

[Tim W]

I got the same message when I went to do the new 3.1 rc1 install.  It had no effect I can tell on the install process or the function of Qubes once installed.  That is, as far as I can tell there have been no issues.   

Just an FYI, I did not get this message back when I installed 3.0 only 3.1 and using the same install device.  I mentioned it in the 3.1 rc1 announcement thread.

Cheers,

Tim

[raah...@gmail.com]

weird i got the message on the first alpha live usb, and then also after installing qubes to my hdd. Apparently disabling mcelog service doesn't make the message go away, i can't remember what I did to stop seeing it, maybe something in grub? I'll have double check that fedora thread and see if i missed a post.

[raah...@gmail.com]

On Friday, August 28, 2015 at 6:55:29 PM UTC-4, raah...@gmail.com wrote:

wow thats alot of info, I don't see your cpu model or the amd graphics card you said you had? Do you actually have an intel cpu and I guess that is why you had mentioned your amd graphics card on the fedora forum?

I think maybe you should specify that you actually have an intel processor and the only thing on your board that is amd was the pcie graphics card. Also maybe not related, but did you make sure to shut off the integrated card in the bios when using the amd card?

[raah...@gmail.com]

On Friday, August 28, 2015 at 6:55:29 PM UTC-4, raah...@gmail.com wrote:

I think I used one of these commands in grub.cfg or the grub command line https://access.redhat.com/solutions/367773 but for the life of me I can't remember...lol I posted on the fedora forum just to make sure its safe to just totally set it off with mce=off, since i have amd hardware. probably is...

[Tim W]

You actually edited grub.cfg or did you do it thru default grub and then regen grub2 ?  I finally decided to get rid of this error message so I now tinkering to see. My first thought was /etc/default/grub editing the GRUB_CMDLINE_LINUX: adding mce=off  But looking over the solution ticket I think the issue is with boot logging. If so then maybe all that is needed instead is to add 'mce=nobootlog'to that line instead of mce=off Then regen grub2 config.  Does that sound right?


[raah...@gmail.com]

best way is probably /boot/grub/grub.conf

[raah...@gmail.com]

On Friday, January 1, 2016 at 11:12:19 PM UTC-5, raah...@gmail.com wrote:
> best way is probably /boot/grub/grub.conf

damn i need an edit button, lol, i just put mce=off last time just in case any other problems with it.

[Marek Marczykowski-Górecki]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Some explanation here:
http://xen.markmail.org/thread/7m6qgkoss5jb3ocr

Until that would be resolved, mce=off should get rid of the message.

- --
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2

iQEcBAEBCAAGBQJWim4NAAoJENuP0xzK19csgDoIAIggx4sl60r7ZW3JGNEJOF9m
wnBhAO5pvoEgJLGQ8svD7oe4ppZ0qhrb/J5DhcsWj2HItAvfO37UvePcsRuGrmUZ
f0+I4KHzNLJ+2yoVLD+mCJyEBKydGCxi9vfR5uw9dI9KwIdjBlGrLEEpbJZFzY7s
w9UF4SFLmvWN2y0HTpRMP7qilq82TcBXft0WBk43gjydE+IpmyaX6xIrZ3eHZ7xl
7PHsLBKgFI6rv1QIH2ZBZsRClpxlYQMWg/J6rEqHKu3OafcFCskW9t/n9ArgezKL
75TJKxCBPsg4UzmRzTtNo9BW4vCr5KbFNQFYHsdsSCmdN9I4rc+mLPRuvg6mhmw=
=0Zt8
-----END PGP SIGNATURE-----

[Tim W]

I do not have grub.conf in that directory.  Only a splash.xpm.gz  but thats it.   Which is why I asked about grub2 thru default grub.

[Tim W]

So as I understand it you end up with a race condition and the answer is to set the init order to prevent this

" so we use following _initcalls
* 1. device_initcall(xen_late_init_mcelog);
* 2. device_initcall_sync(mcheck_init_device);
* 3. late_initcall(threshold_init_device);

* * when running under xen, the initcall order is 1,2,3;
* on baremetal, we skip 1 and we do only 2 and 3."

Is this something that will be patched and then updated in 3.1 testing repo?  I assume its fairly low priority as it debug log that does not effect functional performance.

[raah...@gmail.com]

hmm you are right, try to put it in the grub command line in /etc/default/grub and then update grub.

[Marek Marczykowski-Górecki]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

> So as I understand it you end up with a race condition and the answer is to
> set the init order to prevent this

Not really. Apparently the error message is expected result of proper
initialization...

> *" so we use following _initcalls * 1.

> device_initcall(xen_late_init_mcelog); * 2.
> device_initcall_sync(mcheck_init_device); * 3.
> late_initcall(threshold_init_device); * * when running under xen, the

> initcall order is 1,2,3; * on baremetal, we skip 1 and we do only 2 and 3."*Is

> this something that will be patched and then updated in 3.1 testing repo?
> I assume its fairly low priority as it debug log that does not effect
> functional performance.

I have a patch for this, which just hide the message (it is in devel-4.2
branch of my qubes-linux-kernel repo). Will try to include it in
R3.1-rc2.

- --
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2

iQEcBAEBCAAGBQJWjYe4AAoJENuP0xzK19csd7MH/2YsBGvtHSNvIisc1U0FD6NM
CxH17vmiWeLcGdgEqD6uXyYOQZI58xjBrBzd9c0iPCmZH78RooKZbHUcrwYmBgdD
5YJLWF7lNciER3YfYQvKw/vXPHn5VZmdjzjiOwqWtBNhZ2SOhELAS1ay43SYhtwp
AH4EXXYCaz8uH9yHqcdyjqI7c8CmwgBGZRfrTzwyUZ5w9XNy1rm4msambFg00Of1
Z/BPg5KWWbu8OTH7eQRqNZY0YI2NLULgAT7o3EDanC8wjHTGr6VbrN2IfNxX7fqR
BSrZPdqpIm8o5afv8LbKf2jH9GtpJS9O08B6IsrjFhDd09s1V6keXzS30GcXPNc=
=MDc/
-----END PGP SIGNATURE-----

[Tim W]

Thanks that would be great if it goes into 3.1-rc2 or can be offered in testing repo either way. 

[raah...@gmail.com]

I actually can't get the message to stop either by putting mce=off in /default/grub or in grub.cfg. I dont' know what I'm doing wrong, in 3.0 I must of put it in the right place, and this time on 3.1 i must not be. I just wanna shut it off, anyone able to?

[Tim W]

On Friday, August 28, 2015 at 6:55:29 PM UTC-4, raah...@gmail.com wrote:

Marek,

 is this patch something you already have the code for or would it take much more than uploading it to say testing repo to allow us to apply it.

I know it silly that we care to the degree we seem to about this error message as you have stated its actually telling us its OK.  I guess for me it has always bothered me to have a error message popping up regardless of its meaning.  I guess a bit silly as I said.     Then again if rc2 is coming soon I guess its moot anyways.

Cheers,

Tim

[Marek Marczykowski-Górecki]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

On Thu, Jan 07, 2016 at 10:06:42PM -0800, Tim W wrote:
>
>
> On Friday, August 28, 2015 at 6:55:29 PM UTC-4, raah...@gmail.com wrote:
> >
> > I get this message at boot. Should i update kernel or just ignore it? I
> > haven't noticed any issues. Only issue I have had is I had firefox open in
> > a untrusted domain, the vm froze and vm manager was telling me it refused
> > to give back memory, so I killed it, then restarted it. I then had no
> > network connection and noticed I wasn't connected to the network anymore
> > and it was showing a new network. Intstead of "wired network" in network
> > manager it had a connection enp0s0, so what I did was just clicked back on
> > wired connection and deleted the enp0s0 connection to restore my network.
> > Not sure if this is related to the boot error at all.
> >
> > mce: CPU supports 2 MCE banks
> > mce: Unable to init device /dev/mcelog (rc: -16)
> > mceelog: AMD Processor family 16: Please load edac_mce_amd module.
> > systemd[1]: Unit mcelog.service entered failed state
> > mcelog.setup: CPU is unsupported
> > mcelog: mcelog: AMD Processor family 16: Please load edac_mce_amd module.
> > mcelog: Success
> > mcelog: CPU is unsupported
> >
> >
> > Thanks in advance for your replies.
> >
> > Rich.
> >
>
>
> Marek,
>
> is this patch something you already have the code for or would it take
> much more than uploading it to say testing repo to allow us to apply it.

It is part of kernel-4.1.13-8, uploaded to current-testing repository
(for R3.1).

> I know it silly that we care to the degree we seem to about this error
> message as you have stated its actually telling us its OK. I guess for me
> it has always bothered me to have a error message popping up regardless of
> its meaning. I guess a bit silly as I said. Then again if rc2 is
> coming soon I guess its moot anyways.
>
> Cheers,
>
> Tim
>

- --
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2

iQEcBAEBCAAGBQJWj6X9AAoJENuP0xzK19csISQH/ia2XJMVtdVY5iyAVt2IfqRN
RNuc7hkfrpxrhrUL0jsIwloB7JHJcs9xMTkIzSmh/oj7rGkjcI0NfgWkllK4r6ms
xsMMC12HgJVje1448drV3uQvQiLPkc6Vd3pMCUBdeLQ1igXzI10AT4BiVXCNlSWx
E7lzeFqSt560bAOnjadYjIWpOjSaQyH7UDfuaGlnsVyA+vyR6PGcXLvTkgG1STLy
zHEyilebIiDlZ7XROUb6evkIqCID9Gnmp2PgdC0o01TGis/0d6wuX4Ksg8ntouPO
7LjUemwdFHY53fzhCK6Pz6NpzBRa+S59ePeMhYDPH+Zc5QKF3fVL9Hhq81NcQaQ=
=GRkJ
-----END PGP SIGNATURE-----

[Tim W]

Sorry Marek but what is the cmdn string for current-testing

I thought it was:

$ sudo qubes-dom0-update --enablerepo=qubes-dom0-current-testing kernel-4.11.13-8

I need to start keeping a more detailed cheatsheet.

Cheers,

Tim

[Marek Marczykowski-Górecki]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

"1", not "11". And you can use just "kernel" to install newest available
version.

- --
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2

iQEcBAEBCAAGBQJWkkFfAAoJENuP0xzK19csMkYH/1J2SnGr1Gdk5spYWvf1l9l5
qiM49ZkK/lWd2z6nVQu5XT4XPVtdANopeRffK2fKf2C0h2vBv0RPwyhiHXKQ61YH
WZsE75pdtxo//O/kds+9NuzARAhHe9eRBiV+/I2Oj/x1hySL8/tTNS+ghhb1S56E
twGK2kHk+xrXWHKIT2RKt2AYPj0aYy2nFfjQbg+sadpba/nEJhRyP3/qw0qSPNuw
0T6+MRWK+I/OsJKpmMfKr8Y+HvT9Zd5HB4+HGo0Sq30UYLBrRLoaK0M9UQnTnA2T
+oyncwu/5muOFH12bmff8akZz7uPqfbWF/JXyww7XgdugfNng+tfB1sK3DBY+BY=
=+EKo
-----END PGP SIGNATURE-----

[Tim W]

Thanks Marek!!  I must have been really tired when I posted that.   Thanks for fixing my typos LOL

Cheers

Tim

[Tim W]

Marek,

I thought the default dom0 kernel was 4.1.13-7 and so this was going to -8.   I never actually checked this for dom0 as I up till now had no reason.  I also recall the release stating 4.1 as the feature.   This made it a bit of a surprise when I just ran the kernel upgrade from the testing repo.  It showed the kernel being replaced was 3.19. 
 
After the kernel upgrade with the patch it seems like it now does not show the error.  thanks!!

Cheers,

Tim