H4 Exhaust

[jul...@cityaudioservices.com]

Hopefully a quick question: is the H4 exhaust basically Fiesta donor shaped unit or was it a modified part?

Thanks

[chris...@btinternet.com]

Standard off the shelf MK3 Fiesta.

The bottom half of the mould was made using the floor pan of the fiesta.

 

Chris G

--
--
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To post to this group, send email to quantu...@googlegroups.com
To unsubscribe from this group, send email to quantumowner...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en
 
IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
---
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email to quantumowner...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/f6b1b0aeb3d378fbafe0a7a4af8d1cc8%40cityaudioservices.com.

[jul...@cityaudioservices.com]

Chris

Many thanks, I'd presumed it would have been but presumptions are dangerous!

To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/5B164AA545D9476DAD9E395696BBB183%40HomeNew.

[Bill Jackson]

Good Morning Julian. It was always advertised as a standard Mk3 Fiesta part, but the hooks may not be in a standard position? However, I had no trouble having a replacement fitted off the shelf at my local specialist (NOT a national chain store) although he wouldn't do stainless steel as the system I took to him did indeed have the hooks in the wrong places, and he wasn't offering a cut and weld service in stainless steel.

best wishes.

------ Original Message ------
From: jul...@cityaudioservices.com
To: "Quantum Owners Group" <quantu...@googlegroups.com>
Sent: Sunday, 16 Aug, 20 At 16:48
Subject: [Quantum Owners] H4 Exhaust

Hopefully a quick question: is the H4 exhaust basically Fiesta donor shaped unit or was it a modified part?

Thanks

--

--
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To post to this group, send email to quantu...@googlegroups.com
To unsubscribe from this group, send email to quantumowner...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
---
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.

To unsubscribe from this group and stop receiving emails from it, send an email to unsub...@googlegroups.com">quantumowners+unsub...@googlegroups.com.

[Pete M]

I fitted a Magnex  stainless steel exhaust on mine when built and the rear hanger was in a different place - rear rather than front of the silencer I think.  I just moved the bracket

[Jim Hearne]

The hanger positions varied on the original Mk3 Fiesta anyway, and the Mk3.5 was probably different again.

 

Jim

 

 

From: Pete M

Sent: Monday, August 17, 2020 3:02 PM

To: Quantum Owners Group

To unsubscribe from this group and stop receiving emails from it, send an email to quantumowner...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/c50dc857-bf96-401f-a2ce-52a43aecc580n%40googlegroups.com.

[jul...@cityaudioservices.com]

Thanks all.

All useful stuff.

To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/2945693C5E5D4F9AA12D21270510334F%40JimQuad.

[Hans Defauwes]

Hi,

 

I bought rear break cylinders Fiesta MK2 in 15 and 17.4 mm piston size

 

They don’t fit into my carrier back plate

 

The hole in the plate is 29mm and the brake cylinders are 31.7 and 31.9mm

 

Is there a difference in MK1 and MK2 carrier plates?

 

I thought I have a MK2 XR2 1986 rear axle / brakes.

 

Hans