Fiesta front indicators intermittent

22 views
Skip to first unread message

Ken Needham

unread,
Mar 21, 2020, 8:56:45 AM3/21/20
to quantu...@googlegroups.com

Hi, I have again encountered issues with the front indicators being intermittent or failing just before the MOT is due.

I have identified the issue is down to the bulb mount which is a plastic plug and twist fixing but these parts seem to be very rare particularly in good condition.

The indicator lenses seem to be easy to obtain but more often than not do not have the bulb mount included.

I have found that the problem is actually down to corrosion of contacts within the moulding.

I have successfully “fixed” three bulb holders now by using a Dremel with a cutting disk to remove

A small piece of the plastic where the plastic is adjacent to the internal contact.

The contact is actually made by the feed wire being pushed in from the rear and sliding against the metal strip that goes up the bulb location. The Wire has an end on it preventing the wire being pulled out from the rear.

Having cut away the plastic, the wire can be removed and a new wire soldered onto the cleaned metal strip.

 

I have also found a part that could be used to get out of trouble but it is not a perfect replacement fit on Ebay.

Replacement Bulb Holder Connector PY21W Indicator Turn Sigal Light BAU15S 581

( 332007381360 )

This part is slightly smaller in diameter and has 4 location tags rather that the Fiesta 3. By cutting one of the tags off  a reasonable fixing can be made.

 

Hope that may help

 

Ken

 

Sent from Mail for Windows 10

 

chris...@btinternet.com

unread,
Mar 21, 2020, 12:56:33 PM3/21/20
to quantu...@googlegroups.com
MK3 fiesta bulb holders also fit but you have to be creative wiring them on as you can’t get hold of the ‘plug’ that goes into it.
 
Chris G
--
--
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To post to this group, send email to quantu...@googlegroups.com
To unsubscribe from this group, send email to quantumowner...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en
 
IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
---
You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email to quantumowner...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/DB7PR07MB4971E8DB03C97CAA504D7147B7F20%40DB7PR07MB4971.eurprd07.prod.outlook.com.

susanandmartin

unread,
Mar 21, 2020, 1:03:19 PM3/21/20
to quantu...@googlegroups.com

Some of the parts suppliers eg vehicle Wiring product, Autosparks, etc have bulb holders which may be useful.

 

Sent from Mail for Windows 10

 

From: Ken Needham
Sent: 21 March 2020 12:56
To: quantu...@googlegroups.com
Subject: [Quantum Owners] Fiesta front indicators intermittent

 

Hi, I have again encountered issues with the front indicators being intermittent or failing just before the MOT is due.

--

Reply all
Reply to author
Forward
0 new messages