Proofread, please.

[Jonathan Baldwin]

b3-Mouse2 (NO Flash - USB A) - Google Sheets

For the life of me, I don't know why this spreadsheet is not working. Plus, the quad stick takes forever to switch over to it, so something must be wrong. I have only one other profile loaded to the quad stick, and it works fine.

[Fred Davison]

Enable USB-A Host mode must off in the QMP settings, saved, wait a few seconds for it to be read, and then quadstick restarted, for enable_usb_a_device to work.

If you are still having trouble, swap the order of these two sheets

On Thu, Feb 26, 2026 at 6:21 PM Jonathan Baldwin <bonele...@gmail.com> wrote:

b3-Mouse2 (NO Flash - USB A) - Google Sheets

For the life of me, I don't know why this spreadsheet is not working. Plus, the quad stick takes forever to switch over to it, so something must be wrong. I have only one other profile loaded to the quad stick, and it works fine.

--
You received this message because you are subscribed to the Google Groups "QuadStick" group.
To unsubscribe from this group and stop receiving emails from it, send an email to quadstick+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/quadstick/096be898-937c-446e-bf36-486456e6f32an%40googlegroups.com.

[Jonathan Baldwin]

Thank you. Just one more profile to proofread, this following sheet works, but only the first sheet, not any of the others. It's as if I only have one sheet in the profile.  

[Jonathan Baldwin]

b3-World of Warcraft - Google Sheets

[Fred Davison]

In the preferences sheet:

sip_puff_delay_soft

125

ms

The first sheet has:

increment_mode

normal

mp_center_sip

kb_right_shift	normal	mp_center_sip_soft
kb_2	normal	mp_center_sip_soft

If the soft sip delay is only 1/8-th of a second, it might be difficult to get past the soft pressure before it times out and you hear the beep and get a shift-2 instead of a click and an increment_mode.

The second sheet has:

decrement_mode

normal

mp_center_sip

So there is no way to get to the third sheet.

The third sheet has:

increment_mode	normal	right_sip
decrement_mode	normal	right_sip_soft

The fourth sheet has:

increment_mode	normal	right_sip
decrement_mode	normal	right_puff

It could be confusing to have different inputs mapped to the increment/decrement mode functions on each sheet.

These last two sheets are not accessible anyway and may just be left overs.