RUNNING SWAT+ REV 61.0.1_Unable to create Basin_wb_aa

[phoebe murage]

Hi everyone,

I am setting up my model and I have run into an issue where "basin_wb_aa" is not created in the model. (attached snippet)

I have followed the instructions by checking all yearly and average annual files (attached snippet) and also run a check with SWAT+ executable to debug any of my input files. (attached snippet) which are okay.

Checked the output database no files have been developed. (attached snippet)

Kindly advise where the error is.

[Nancy B. Sammons]

Are you certain that the SWAT+ simulation executed successfully without an error?

 

 

From: qswa...@googlegroups.com <qswa...@googlegroups.com> On Behalf Of phoebe murage
Sent: Saturday, September 20, 2025 4:57 AM
To: QSWAT+ <qswa...@googlegroups.com>
Subject: [QSWAT+ User Group] RUNNING SWAT+ REV 61.0.1_Unable to create Basin_wb_aa

 

You don't often get email from phoeb...@gmail.com. Learn why this is important

--
You received this message because you are subscribed to the Google Groups "QSWAT+" group.
To unsubscribe from this group and stop receiving emails from it, send an email to qswatplus+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/qswatplus/43f9a686-cd81-449e-b47f-804aeae734f0n%40googlegroups.com.

[phoebe murage]

Hi Nancy,

I am not sure it successfully runs because I keep getting the error message for the basin_wb_aa after checking the "analyze output for visualization" box.

But when I run the SWAT+ rev 61.0.1, and check the "use debug version" no error message is displayed. It just sets the dialogue box that all selected tasks have been completed.(attached snippet)

If there is an error, I am not able to understand where it is coming from.

Kind regards,

Phoebe Murage

[Moussa Yatta]

Hello everyone,

Does anybody know how to fix this error? I also successfully developed my model until I got to the SWAT+ Editor run but I am now having the same problem "Could not load SWAT+ Check because the table "basin_wb_aa" does not exist in your output database. Re-run your model and check all yearly and average annual files under the print options, and keep the analyze output box checked."

I double-checked if the right boxes were selected and everything looks correct. I really appreciate your time and support.

I have attached a screenshot of the error message.

Thanks!

To view this discussion visit https://groups.google.com/d/msgid/qswatplus/CAMHz6PTykomCVFX%2Brpo%3D5TmU%3DVDPm9M3BjXS1X_reLMQ7vUNeQ%40mail.gmail.com.