Atem Mini + QLAB

Andrew Lee

unread,

Jun 13, 2023, 8:52:31 AM6/13/23

to QLab

Hello everyone, I have a question concerning ATEM Mini.

So Qlab is connected to Atem Mini for my camera inputs. I noticed Qlab goes black and camera input is not visible after running for 2hrs or more... Atem is also connected via Hdmi Out to a monitor (The camera feed is active and running on the monitor) however it is a black the surface of qlab.. (So far the only fix I had with this was to power cycle the atem mini, unplug and plug in again prior before showtime)

Is this an Atem issue ? (Atem is ventilated and has a fan cooling it atm)

Thank you everyone!

Seablade -

unread,

Jun 13, 2023, 9:06:05 AM6/13/23

to ql...@googlegroups.com

ATEM Minis do this on occasion with other software as well, I would suggest it is an ATEM issue, though usually it isn't as quick as 2 hours, generally I see it after a couple of days of being connected to a computer.

Thomas

--
Contact support anytime: sup...@figure53.com
Follow QLab on Twitter: https://twitter.com/QLabApp
User Group Code of Conduct: https://qlab.app/code-of-conduct/
---
You received this message because you are subscribed to the Google Groups "QLab" group.
To unsubscribe from this group and stop receiving emails from it, send an email to qlab+uns...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/qlab/8feede11-b07c-4577-8b0e-b51b86661456n%40googlegroups.com.

Andrew Lee

unread,

Jun 15, 2023, 9:54:21 AM6/15/23

to QLab

Thank You Thomas for the clarification..

Reply all

Reply to author

Forward