QLab 5 Timeline Loop

[Andy Schuler]

I have a group that has a timecode cue and a music cue. I have them in timeline mode so that I can jump around as needed. The group is set to auto follow. The next cue in the stack is a play cue which targets the group. I had this successfully working and then deleted something but I cant figure out what. When I trigger the play cue on it's own, it successfully starts the group. When it is working through the auto follow function, either the group starts with a post wait on the child cues, or it will only play one cue in the timeline.

[blindeye 1995]

Sounds like some Kind of Bug Check the Mode in Timeline group and maybe retarget your play cue or make them new. If you want to Future out what You have Delete maybe you can use an Walker Version of your workspace thanks to the Auto Backup Feature of Qlab 5

Can you Share a few Screenshots of the Portion of your workspace that isnt properly working ? 

With King regards Max 

Am 09.04.2024 um 23:38 schrieb Andy Schuler <schu...@gmail.com>:

I have a group that has a timecode cue and a music cue. I have them in timeline mode so that I can jump around as needed. The group is set to auto follow. The next cue in the stack is a play cue which targets the group. I had this successfully working and then deleted something but I cant figure out what. When I trigger the play cue on it's own, it successfully starts the group. When it is working through the auto follow function, either the group starts with a post wait on the child cues, or it will only play one cue in the timeline.

--
Contact support anytime: sup...@figure53.com
Follow QLab on Threads: https://threads.net/@QLabApp
User Group Code of Conduct: https://qlab.app/code-of-conduct/
---
You received this message because you are subscribed to the Google Groups "QLab" group.
To unsubscribe from this group and stop receiving emails from it, send an email to qlab+uns...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/qlab/0b6ae6f7-3040-4099-a037-9a07ab50e1fdn%40googlegroups.com.

[Andy Schuler]

Starting the bottom cue (which should be 35) causes the stack to function correctly. Once the group ends, it auto follows to the "play" cue, which triggers a post-wait in the group. Everything works correctly except for the post-wait causing dead air.

[Sam Kusnetz]

Andy,

Try this: Select the Group cue and go to the Triggers tab in the inspector. There, in the lower right corner, set the cue to “If running, a second trigger hard stops & restarts.”

Does that address your problem?

Sam

—

Sam Kusnetz (he/him) | Figure 53

s...@figure53.com

[Andy Schuler]

This resolved the issue. Thanks!