NI-XNET support

[Jonathan Graesser]

Hi python-can devs,

We have been using python-can with vector and peak hardware.

For some automated test system we are now employing National Instruments hardware with NI-9860 XNET CAN Interfaces.

Has there been work done on supporting the NI-XNET drivers, which are replacing the old NI- CAN drivers?

Thank you!

Best regards,

Jonathan

[Christian Sandberg]

Not to my knowledge. You are most welcome to contribute a new interface for it!

/ Christian

[Simon Schmidt]

Hello together,

This Email was quite a long time ago, but I think my question fits.

I´ve tried to add the NI-Xnet Interface to the python-can package with the official NI implementation -> https://github.com/ni/nixnet-python

Maybe someone could take a short look over my code, because i´ve not that much experience with python.

Here´s my fork -> https://github.com/SimonKasten/python-can

Best Regards,

Simon

[Jonathan Graesser]

Hi Simon,

I will give it a go and get back to you. 

I never managed to test my own (very rough) implementation. 

We have some python based scripts to flash ECUs and I would like to use them with our NI based test system without implementing everything in Labview.

Best regards, 

Jonathan 

--
You received this message because you are subscribed to the Google Groups "python-can" group.
To unsubscribe from this group and stop receiving emails from it, send an email to python-can+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/python-can/7e35f0f7-80d7-4ec1-897b-55547b8ff837n%40googlegroups.com.