Can't Disable "Track Changes Bar"

[Hil tronix]

Hello,

On PyScripter 4.2.1.0 x64, I am unable to disable the Track Changes Bar so it stays disabled after a restart.  It does in fact stay disabled after a single restart.  But on the "second" restart after disabling it, it's active again.

To Reproduce:

Tools > Options > IDE Options > Editor > Track changes bar > Visible

Set false

OK

Restart PyScripter

Still disabled

Restart PyScripter again

"Track changes bar" is now set to true, without having gone into Tools Options at all.

This is probably a valuable feature to some and I see the value in some circumstances.  It's definitely a nice option to have available, if it can be turned on and off as required. 

Personally I don't want it enabled by default.  It would be nice if the setting would stick permanently till I need to use it.

Thanks,
Carey

[peet....@gmail.com]

I’ve also had a bit of a problem with this – in that it’s become magically re-enabled once or twice all by itself.

 

Peet

--
You received this message because you are subscribed to the Google Groups "PyScripter" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pyscripter+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/pyscripter/7bb9f6b4-76bd-4f94-b9da-7a07a8b3984dn%40googlegroups.com.

[PyScripter]

Opened new issue  Track changes bar visibility enabled again after getting disabled. · Issue #1189 · pyscripter/pyscripter (github.com)

On Friday, November 25, 2022 at 7:07:44 PM UTC+2 peet....@gmail.com wrote:

I’ve also had a bit of a problem with this – in that it’s become magically re-enabled once or twice all by itself 

Peet

[PyScripter]

Fixed.  The fix will be available in the soon to be released version 4.2.2.

On Friday, November 25, 2022 at 7:14:11 PM UTC+2 PyScripter wrote:

Opened new issue  Track changes bar visibility enabled again after getting disabled. · Issue #1189 · pyscripter/pyscripter (github.com)

On Friday, November 25, 2022 at 7:07:44 PM UTC+2 Peet wrote:

I’ve also had a bit of a problem with this – in that it’s become magically re-enable Peet wrote:

I’ve also had a bit of a problem with this – in that it’s bed once or twice all by itself