Possible pilot error possible bug

[Matthew]

Hi all

When I output a 360 x 180 then swap to a rectilinear output I often get a new window with the word vector appearing indefinitely. It is most often triggered when I attempt to input 120 degrees in figures rather than the default 135 angle of view and it becomes 1 degree. Is this a known pilot error on my part, a local issue or a bug.? Mac Monterey 12.12 and 12.13

Thanks for any insight

Matthew

[PTGui Support]

Hi Matthew,

This bug occurred in version 12.12 but was fixed in 12.13. Could you make sure you are running the latest version? Do Help -Check for Updates.

Kind regards,

Joost Nieuwenhuijse

ptgui.com

On 24 Jul 2022, at 12:57, Matthew <mat...@matthewwardphotography.com> wrote:

Hi all

When I output a 360 x 180 then swap to a rectilinear output I often get a new window with the word vector appearing indefinitely. It is most often triggered when I attempt to input 120 degrees in figures rather than the default 135 angle of view and it becomes 1 degree. Is this a known pilot error on my part, a local issue or a bug.? Mac Monterey 12.12 and 12.13

Thanks for any insight

Matthew

--
You received this message because you are subscribed to the Google Groups "PTGui Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ptgui+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ptgui/1e49f392-2a75-470c-a022-7ddfbdf207a3n%40googlegroups.com.