Stiching a dual image DNG from a 360° camera using PTGui.

[Bill Banks]

I am wanting to be able to stitch a 360° image from an Insta 360 camera. See the attached sample of how it looks.

I am uncertain if this is possible and if so... how to instruct PTGui to behave to make it happen.

Please help.

[John Houghton]

Bill. Yes this is possible and quite simple.  See the FAQ at https://ptgui.com/support.html#6_41 

Your test.jpg will not work automatically as important metadata has been lost in processing, so PTGui won't recognise it as a dual lens camera image.  The dng should be ok and also a tiff or jpg directly generated from the raw image.  A manual stitch looks like this after adding the image twice and masking out the duplicate image circles:

John

[F. Lipzyc Photographe Agrée Google]

Merci !

Cordialement.

Frédéric LIPZYC
Photographe dans
les Règles de l'Art
Agréé Google
06 59 39 15 94

Mes activités :
https://linktr.ee/fredericlipzyc

Envoyé de mon téléphone
   

--
You received this message because you are subscribed to the Google Groups "PTGui Support" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ptgui+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ptgui/0dc185da-844f-4da2-957e-05bf1fff206cn%40googlegroups.com.

[Bill Banks]

Thank you for the response. I did as instructed (With the original DNG) and eureka... it worked.