Band reports in 20M phone

[Jeffrey Bedard]

I have an issue that I am trying to diagnose.  When operating WSTJ-X on 20M, I am repeatedly getting 2 band reports from PSK reporters, 1 from a ham in Arizona and another from a ham in Iowa.  It's the same reporters each time. The AZ report has my transmission on 14.326.891 and the IA report has my transmission on 14.259.379.  These are the only out of frequency reports I am receiving.  When I check the dozens of other spots, all of those are showing my transmission at 14.075.XXX.  i have not had any difficulty making contacts and signal reports from contacts are what I would expect given band conditions.  Also, this issue only appears on 20M.  

I am running WSJT-X 2.7.0 with a SignalLink and an FT-891 at 15W on a EFHW.  I've double checked volume/level settings in Windows and have my TX & RX settings for the SignalLink set midway.

Any thoughts on what may be causing this?  And any guidance on how to proceed with further diagnosis?

Thanks for your help!

[Philip Gladstone]

It is unfortunate that people don't have their CAT control configured between their radios and the PC. I only detect the cases when other people report the wrong band. I wonder if I could narrow things so that I could spot a 100kHz offset. 

Philip

--
You received this message because you are subscribed to the Google Groups "PSK Reporter" group.
To unsubscribe from this group and stop receiving emails from it, send an email to psk-reporter...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/psk-reporter/7bd582cd-f63b-4f2e-8aa3-d1677ef49710n%40googlegroups.com.

Philip Gladstone