synthesize_Synthesis_main_minimal_interface.sh not created

[Jack Watson]

Hi, I am new to using this tool and I tried to run the program using the tutorials on the site, but after executing the following command, the file synthesize_Synthesis_main_minimal_interface.sh   will not be generated. it only generate .mem and Verilog file.

/opt/panda/bin/bambu ../spec.c  

Do you need to use another flag to run the program?

[Fabrizio Ferrandi]

Dear Jack,

to create the synthesis script you need to pass option --evaluation.

In case bambu performs first a simulation, generating a simulation script, and then a synthesis by running a synthesis script.

Cheers,

Fabrizio

[sonali shukla]

Hello, I am new to using this tool. I am getting the following issue. Please have a look and suggest the solution.

Screenshot on the left shows the files I obtained after running  /opt/panda/bin/bambu ../spec.c

However, the screenshot on the right shows the expected output files as per the tutorial.

On comparison, it can be seen that few more files are missing apart from  synthesize_Synthesis_main_minimal_interface.sh . 

[sonali shukla]

Somehow the screenshots didn't get paste in my previous question. But my query is simple that I am not able to get the same number of files after running /opt/panda/bin/bambu ../spec.c  as it was expected as shown in the panda tutorials( https://panda.dei.polimi.it/?page_id=555  ). 

I have used the suggestion of adding --evaluation to the command but in the end I am getting error as shown below:

error -> Error in generating the expected test results.

This is the same error I am getting when I am doing simulation following section 4 in  https://panda.dei.polimi.it/?page_id=555

Please suggest me how should I proceed further to resolve these errors.

[Fabrizio Ferrandi]

Are you using the panda-0.9.7 branch or the main branch?

Cheers,

Fabrizio 

--

Name:                  Fabrizio Ferrandi  

Department:            Dipartimento di Elettronica Informazione
                        e Bioingegneria  

Organization:          Politecnico di Milano  

Address:               Piazza Leonardo Da Vinci, 32
 z.i.p./City:           I-20133 Milano, Italy 

Phone:                 +39 02 2399 3479 

Fax:                   +39 02 2399 3411 

 www: http://ferrandi.faculty.polimi.it

Il giorno 3 dic 2020, alle ore 20:38, sonali shukla <sonalis...@gmail.com> ha scritto:

Somehow the screenshots didn't get paste in my previous question. But my query is simple that I am not able to get the same number of files after running /opt/panda/bin/bambu ../spec.c  as it was expected as shown in the panda tutorials( https://panda.dei.polimi.it/?page_id=555  ). 

--
You received this message because you are subscribed to the Google Groups "PandA project discussions and questions" group.
To unsubscribe from this group and stop receiving emails from it, send an email to panda-project-discussio...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/panda-project-discussions-questions/493260d6-2a74-4636-a0cc-d3d0ccca2810n%40googlegroups.com.

[sonali shukla]

After using  ./bambu --version, I see the version mentioned below

Version: PandA 0.9.6 - Revision 891ec3caed502474cab0813cc4a9fc678deabaa5

[ferrandi...@gmail.com]

I’m sorry but you have to chechout the panda-0.9.7-dev branch. The issue you have faced have been already fixed in such a branch.

Cheers,

Fabrizio 

Il giorno 4 dic 2020, alle ore 07:39, sonali shukla <sonalis...@gmail.com> ha scritto:



To view this discussion on the web visit https://groups.google.com/d/msgid/panda-project-discussions-questions/ea47ff59-94f6-466d-9752-ffb878d80d33n%40googlegroups.com.

[sonali shukla]

Does that mean I have to reinstall the tool for 0.9.7 branch? Can you please share the link which I should follow to avoid further issues?

[Fabrizio Ferrandi]

try with:

1) git clone g...@github.com:ferrandi/PandA-bambu.git

2) git checkout panda-0.9.7-dev

3) mkdir build

4) cd build

in case you have already downloaded the project with git you may skip step 1), 3)  and 4). To avoid issue you need to clean the project with make clean when you will be in the build directory.

cheers,

Fabrizio

To view this discussion on the web visit https://groups.google.com/d/msgid/panda-project-discussions-questions/6d8c0b0a-b6ff-4bf9-ad65-95d783cf22cen%40googlegroups.com.

-- 
-------------------------------------------------------------------
 Name:                  Fabrizio Ferrandi
 Department:            Dipartimento di Elettronica Informazione
                        e Bioingegneria
 Organization:          Politecnico di Milano
 Address:               Piazza Leonardo Da Vinci, 32
 z.i.p./City:           I-20133 Milano
 Country:               Italy
 Phone:                 +39 02 2399 3479

 Fax:                   +39 02 2399 3411

 E-mail:                fabrizio...@polimi.it
 www:                   http://ferrandi.faculty.polimi.it
-------------------------------------------------------------------

[sonali shukla]

At step 1, I am getting error. It says permission denied (public key).

[sonali shukla]

I started following the steps suggested by you.

Step 1)    Since I got error of permission denied when tried with  git clone g...@github.com:ferrandi/PandA-bambu.git . Therefore, I cloned the project using link https://github.com/ferrandi/PandA-bambu

Step 2)    I got error as shown in the attached file