Openwisp_config not applying configuration after flashing

henriqsc

unread,

Nov 1, 2019, 1:48:35 PM11/1/19

to OpenWISP

Hello

I'm building a firmware with openwisp pre-installed but whenI flash the firmware openwisp acts a bit weird right after the image is flashed. It retieves the configuration from server a applies it but does not restart the services so that the configuration is not really applied. It takes sometime (like 2 minutes) and finally services are reloaded and the configuration is applied.

If I reboot it Openwisp works fine. Do you have any clue or have experienced something like that?

It's the second firmware I build with openwisp but it's the first time it happens.

Openwrt version is 18.06.4 and hardware is archer_c7_v5. Any chance of this problem be specific?

Regards,

henriqsc

unread,

Nov 1, 2019, 1:50:15 PM11/1/19

to OpenWISP

The same happens after factory reset.

henrique

unread,

Nov 8, 2019, 10:08:20 AM11/8/19

to OpenWISP

solved, it was some openwrt issue.

Ajay Tripathi

unread,

Nov 9, 2019, 6:56:33 AM11/9/19

to OpenWISP

Hi,

On Friday, November 8, 2019 at 8:38:20 PM UTC+5:30, henrique wrote:

solved, it was some openwrt issue.

If possible, can you please share your solution -- someone else looking for it in the future might benefit! :-)

Best,
Ajay

Reply all

Reply to author

Forward