SARA G-R inslab

[carlos andres parraguez]

Hello, 

I have a question about the GR coefficients of the SARA v1.0 model specified in the inslab sources, on the official website (attached image) the values ​​are not equal to the values ​​in the file, where imcremental mfd was used and the GR values ​​were not adjust; just the "a" value. For example inslab 1 in the image it is specified that "a" is equal to 5.0636 but in the file the value of a in inslab 1 is equal to 4.312 (It was calculated using the 15640 points that model inslab 1). So which one is the correct one on the website or the one in the archive?

[Marco Pagani]

Dear Carlos,

Sorry for replying late. The values you are comparing perhaps do not come from the same model.

Can you pls explain which OQ input files you are currently using?

That table refers to an outdated model.

Best wishes,

Marco

Hello, 

I have a question about the GR coefficients of the SARA v1.0 model specified in the inslab sources, on the official website (attached image) the values ​​are not equal to the values ​​in the file, where imcremental mfd was used and the GR values ​​were not adjust; just the "a" value. For example inslab 1 in the image it is specified that "a" is equal to 5.0636 but in the file the value of a in inslab 1 is equal to 4.312 (It was calculated using the 15640 points that model inslab 1). So which one is the correct one on the website or the one in the archive?

--
You received this message because you are subscribed to the Google Groups "OpenQuake Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openquake-use...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openquake-users/f4e38567-d2fd-4ab3-8e11-36176b01bef4n%40googlegroups.com.

MARCO PAGANI | Seismic Hazard Team Lead | Skype mm.pagani | +39-0382-5169863

GLOBAL EARTHQUAKE MODEL | working together to assess risk

GEM - globalquakemodel.org | T - @GEMwrld | F - GEMwrld