juki nozzle min max part diameter need pleas

[e.fia...@gmail.com]

Hello

Is there somebody to send me settings for different juki nozzle?

Actually I have 503 504 and 507.

(settings for other are welcome!)

Thanks guys

[mark maker]

Hi,

it is best to understand these settings, so you can adapt them to your needs and preferences. The settings can easily be derived from physical properties. Guidance is here:

https://github.com/openpnp/openpnp/wiki/Setup-and-Calibration_Nozzle-Setup#nozzle-tip-configuration

The settings are most important for Bottom Vision and other functions. Make sure to have the latest stock pipelines that automatically use these properties:

https://github.com/openpnp/openpnp/wiki/Bottom-Vision

Also read about Background Calibration, where they are also used and where other important properties are obtained and set:

https://github.com/openpnp/openpnp/wiki/Nozzle-Tip-Background-Calibration

Obviously, such settings can also be shared here for well known nozzle tip brands and products, but there might still be differences in the way they are used by different users (part sizes etc.). 🙂

_Mark

--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/6910a957-2ac1-4931-848c-c09fc6d9cf12n%40googlegroups.com.

[M. Mencinger]

And for Juki nozzles size is listed here; 

https://groups.google.com/u/1/g/openpnp/c/GFyOt9iGTuE/m/yt6OPBE4AgAJ

To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/dc3192dd-6a83-423b-8223-c1b4ee170e8d%40makr.zone.