how to get around: no OCR region defined (Feeders)

[jbasia]

how to get around:  no OCR region defined (PushPullFeeders) ?

I have no markings near the pickup area. 

Calibration trigger is set to "None"

Check at job start is not clicked.

[Litterio Andrea Guainella]

Hi jbasia,

I had too same problem so I provide a fake ocr region click to "Setup OCR region" and follow step.

You can choose any area.

LAG

[mark maker]

Set OCR Wrong Part Action to None and switch off Stop after wrong part? and switch off Check on Job Start?

https://github.com/openpnp/openpnp/wiki/ReferencePushPullFeeder#vision--ocr

If this does not address the problem, please report back (then it is a bug).

> Calibration trigger is set to "None"

Note, OCR has nothing to do with that. You'll miss out on precision if you set to None. I recommend UntilConfident which automatically learns if vision calibration is needed.

https://github.com/openpnp/openpnp/wiki/ReferencePushPullFeeder#vision--calibration

_Mark

--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/b18ed6d9-026d-497a-a1bc-ec36b7394fden%40googlegroups.com.