Slow connection

geo0rpo

unread,

Nov 19, 2021, 3:03:51 AM11/19/21

to OpenPnP

Hello everyone!

Please have a look at my debug log:

2021-11-17 18:06:07.299 Main INFO: Bienvenue, Bienvenido, Willkommen, Hello, Namaskar, Welkom, Bonjour to OpenPnP version 2021-10-02_09-48-01.77ab6f9.

2021-11-17 18:06:19.206 ReferenceMachine DEBUG: setEnabled(true)

2021-11-17 18:06:39.251 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(G21 ; Set millimeters mode, 20000)...

2021-11-17 18:06:39.252 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(G90 ; Set absolute positioning mode, 20000)...

2021-11-17 18:07:06.250 ReferenceMachine DEBUG: homing machine

and another one:

2021-11-18 18:42:13.172 Main INFO: Bienvenue, Bienvenido, Willkommen, Hello, Namaskar, Welkom, Bonjour to OpenPnP version 2021-10-02_09-48-01.77ab6f9.

2021-11-18 18:42:24.217 ReferenceMachine DEBUG: setEnabled(true)

2021-11-18 18:42:44.261 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(G21 ; Set millimeters mode, 20000)...

2021-11-18 18:42:44.262 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(G90 ; Set absolute positioning mode, 20000)...

2021-11-18 18:43:17.956 ReferenceMachine DEBUG: homing machine

As you can see it takes very long from the moment I press the "power" button until the "home" button becomes yellow.

When I try pronterface, smoothieboard always replies at once.

Do you ave any ideas?

Thanks!

machine.xml

mark maker

unread,

Nov 19, 2021, 3:06:50 AM11/19/21

to ope...@googlegroups.com

Set the log level to TRACE on the log tab. Then send a fresh full log.

https://github.com/openpnp/openpnp/wiki/FAQ#where-are-configuration-and-log-files-located

_Mark

--
You received this message because you are subscribed to the Google Groups "OpenPnP" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openpnp+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/6c227999-e3c9-45df-848f-e57875201a58n%40googlegroups.com.

geo0rpo

unread,

Nov 19, 2021, 10:08:49 AM11/19/21

to OpenPnP

OK, first one failed. I also get this often and I have to ctrl+alt+delete

2021-11-19 16:58:57.624 Main INFO: Bienvenue, Bienvenido, Willkommen, Hello, Namaskar, Welkom, Bonjour to OpenPnP version 2021-10-02_09-48-01.77ab6f9.

2021-11-19 16:59:10.219 ReferenceMachine DEBUG: setEnabled(true)

2021-11-19 16:59:30.265 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(G21 ; Set millimeters mode, 20000)...

2021-11-19 16:59:30.267 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(G90 ; Set absolute positioning mode, 20000)...

2021-11-19 16:59:30.265 GcodeDriver$ReaderThread ERROR: Read error: java.io.IOException: Read error.

at org.openpnp.machine.reference.driver.SerialPortCommunications.read(SerialPortCommunications.java:143)

at org.openpnp.machine.reference.driver.ReferenceDriverCommunications.readUntil(ReferenceDriverCommunications.java:91)

at org.openpnp.machine.reference.driver.ReferenceDriverCommunications.readLine(ReferenceDriverCommunications.java:71)

at org.openpnp.machine.reference.driver.GcodeDriver$ReaderThread.run(GcodeDriver.java:1205)

2021-11-19 16:59:30.267 GcodeAsyncDriver$WriterThread ERROR: Write error on serial://COM3: java.io.IOException: Write error.

Second one after ctrl+alt+delete:

2021-11-19 17:01:03.397 Main INFO: Bienvenue, Bienvenido, Willkommen, Hello, Namaskar, Welkom, Bonjour to OpenPnP version 2021-10-02_09-48-01.77ab6f9.

2021-11-19 17:01:03.397 Scripting TRACE: Scripting.on Startup

2021-11-19 17:01:04.712 AbstractBroadcastingCamera TRACE: Camera HeadCamera thread 27 started.

2021-11-19 17:01:05.948 AbstractBroadcastingCamera TRACE: Camera BottomCamera thread 29 started.

2021-11-19 17:01:14.999 ReferenceMachine DEBUG: setEnabled(true)

2021-11-19 17:01:35.041 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(G21 ; Set millimeters mode, 20000)...

2021-11-19 17:01:35.041 GcodeDriver$ReaderThread TRACE: [serial://COM3] << Smoothie

2021-11-19 17:01:35.042 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(G90 ; Set absolute positioning mode, 20000)...

2021-11-19 17:01:35.042 GcodeDriver$ReaderThread TRACE: [serial://COM3] << ok

2021-11-19 17:01:35.042 GcodeAsyncDriver$WriterThread TRACE: [serial://COM3] >> G21

2021-11-19 17:01:35.043 GcodeDriver$ReaderThread TRACE: [serial://COM3] << ok

2021-11-19 17:01:35.043 GcodeAsyncDriver$WriterThread TRACE: [serial://COM3] >> G90

2021-11-19 17:01:35.043 GcodeDriver$ReaderThread TRACE: [serial://COM3] << ok

2021-11-19 17:01:56.004 ReferenceMachine DEBUG: homing machine

2021-11-19 17:01:56.005 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(G28 ;HOME, -1)...

2021-11-19 17:01:56.006 GcodeAsyncDriver$WriterThread TRACE: [serial://COM3] >> G28

2021-11-19 17:01:56.006 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(G92 Z0 ;Set Z to zero, -1)...

2021-11-19 17:01:56.007 GcodeAsyncDriver$WriterThread TRACE: [serial://COM3] >> G92Z0

2021-11-19 17:01:56.007 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(G1 Z-4.5 ;Move to balance, -1)...

2021-11-19 17:01:56.008 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(G92 Z0 ;Set Z to zero, -1)...

2021-11-19 17:01:56.008 GcodeAsyncDriver$WriterThread TRACE: [serial://COM3] >> G1Z-4.5

2021-11-19 17:01:56.008 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(G92 A0 ;Set N1 rotation to zero, -1)...

2021-11-19 17:01:56.008 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(G92 B0 ;Set N2 rotation to zero, -1)...

2021-11-19 17:01:56.009 GcodeAsyncDriver$WriterThread TRACE: [serial://COM3] >> G92Z0

2021-11-19 17:01:56.009 GcodeAsyncDriver$WriterThread TRACE: [serial://COM3] >> G92A0

2021-11-19 17:01:56.009 GcodeAsyncDriver$WriterThread TRACE: [serial://COM3] >> G92B0

2021-11-19 17:01:56.010 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(M400, -1)...

2021-11-19 17:01:56.010 GcodeAsyncDriver DEBUG: serial://COM3 commandQueue.offer(M114 ; get position, -1)...

2021-11-19 17:01:56.010 GcodeAsyncDriver$WriterThread TRACE: [serial://COM3] >> M400

2021-11-19 17:01:56.010 GcodeAsyncDriver$WriterThread TRACE: [serial://COM3] >> M114

2021-11-19 17:02:08.563 GcodeDriver$ReaderThread TRACE: [serial://COM3] << ok

2021-11-19 17:02:08.564 GcodeDriver$ReaderThread TRACE: [serial://COM3] << ok

2021-11-19 17:02:08.698 GcodeDriver$ReaderThread TRACE: [serial://COM3] << ok

bert shivaan

unread,

Nov 19, 2021, 10:53:41 AM11/19/21

to OpenPnP

to my knowledge, something in the JAVA something or other changed at some point making the connect time REALLY slow!!. I remember this back in V1.0. It went form seconds to like you are seeing now. It is not board or computer dependent.

It is also not openPNP strictly speaking. It is something in JAVA I think. Or a library, or something.

It is possible this is not that issue, but I wanted to remind all about that.

To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/5c214959-4c12-4890-95a3-fb816f99ddaen%40googlegroups.com.

mark maker

unread,

Nov 19, 2021, 3:00:32 PM11/19/21

to ope...@googlegroups.com

This is certainly not normal.

There is also nothing to indicate it is waiting for something, these are all asynchronous communications.

I would look into system resources. RAM being exhausted or something. Check preview FPS in cameras etc.

_Mark

To view this discussion on the web visit https://groups.google.com/d/msgid/openpnp/CA%2BKNHNwM4GOJuBoZJx4CBaPptgmKkPeE40YXn3Nm10R25vpk2w%40mail.gmail.com.

Reply all

Reply to author

Forward