--
Public site: http://www.openlocationcode.com/
Github project: https://github.com/google/open-location-code
Demo site: http://plus.codes/
---
You received this message because you are subscribed to the Google Groups "Plus Codes Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to open-location-c...@googlegroups.com.
To post to this group, send email to open-loca...@googlegroups.com.
Visit this group at https://groups.google.com/group/open-location-code.
To view this discussion on the web, visit https://groups.google.com/d/msgid/open-location-code/5e36b7a3-57d3-4e32-bd57-c63af2538924%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Hi Cesar,That sounds like a cool idea, but have you tested GPS reception under water? Or will you use the last surface position?
The C library should work on arduino with only minor changes - this assumes you already have the decimal latitude and longitude from the GPS device, and that you need the full functionality.A couple of years ago I was experimenting with an ATtiny4313 with attached GPS chip, because I was trying to see what the smallest, lowest power thing was we could run it on. The code reads the NMEA strings directly from the GPS chip and encodes the plus code:If that would help I'm happy to share it.
On Tue, 26 Feb 2019 at 05:23, Cesar Jung-Harada <con...@cesarharada.com> wrote:
We are building an arduino-powered diving computer to tag ghost nets, to get them recovered.--
We like plus code because it's easier for divers to write down on their slates.
Do you have an offline arduino library so we could display the plus code on an offline arduino-powered device?
Thank you!
Public site: http://www.openlocationcode.com/
Github project: https://github.com/google/open-location-code
Demo site: http://plus.codes/
---
You received this message because you are subscribed to the Google Groups "Plus Codes Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to open-location-code+unsub...@googlegroups.com.
Time: 10:56:5.0Date: 27/2/2019Fix: 1 quality: 1Location: 4721.9287N, 831.4218ELocation (in degrees, works with Google Maps): 47.36547852, 8.52369690Plus code: 8FVC9G8F+5FSpeed (knots): 9.55Angle: 256.43Altitude: 428.00Satellites: 3HDOP: 3.01
To unsubscribe from this group and stop receiving emails from it, send an email to open-location-c...@googlegroups.com.
To post to this group, send email to open-loca...@googlegroups.com.
Visit this group at https://groups.google.com/group/open-location-code.
To view this discussion on the web, visit https://groups.google.com/d/msgid/open-location-code/5e36b7a3-57d3-4e32-bd57-c63af2538924%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
Public site: http://www.openlocationcode.com/
Github project: https://github.com/google/open-location-code
Demo site: http://plus.codes/
---
You received this message because you are subscribed to the Google Groups "Plus Codes Community Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to open-location-c...@googlegroups.com.
To post to this group, send email to open-loca...@googlegroups.com.
Visit this group at https://groups.google.com/group/open-location-code.
To view this discussion on the web, visit https://groups.google.com/d/msgid/open-location-code/23468708-6eb3-4624-8399-91439f6e12a5%40googlegroups.com.