ns2
919 views
Skip to first unread message
RPK
Sep 13, 2011, 11:57:13 PM9/13/11
to Network Simulator 2 (NS2)
HOW MANY DAYS required to learn ns2 basics
muruganns2
Sep 14, 2011, 1:21:43 AM9/14/11
to Network Simulator 2 (NS2)
pankaja r
Sep 14, 2011, 1:26:29 AM9/14/11
to ns-u...@googlegroups.com
u learned, how c++ file is linked to tcl, I want run AODV protocol how can i do
--
On Wed, Sep 14, 2011 at 10:51 AM, muruganns2 <sanguco...@gmail.com> wrote:
Its take more than a month.you can learn it from www.isi.edu
--
You received this message because you are subscribed to the Google Groups "Network Simulator 2 (NS2)" group.
To post to this group, send email to ns-u...@googlegroups.com.
To unsubscribe from this group, send email to ns-users+u...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/ns-users?hl=en.
--
Regards
Pankaja R
amal banerjee
Sep 14, 2011, 5:47:28 AM9/14/11
to ns-u...@googlegroups.com
It depends entirely on you, specifically how good you are at C++, how familiar you are with network protocols (ISO/OSI 7 layer protocol stack). In addition, you have become familiar with Tcl/Tk,
and interfacing with the C++ code. Also, compiling/installing NS2 on a standard Linux machine is tricky, because of the Tcl/Tk libraries which also need to be compiled and installed at the same time. If it was just C++ on Linux, it would be very easy. But if you are patient, it should work out fine.
and interfacing with the C++ code. Also, compiling/installing NS2 on a standard Linux machine is tricky, because of the Tcl/Tk libraries which also need to be compiled and installed at the same time. If it was just C++ on Linux, it would be very easy. But if you are patient, it should work out fine.
On Tue, Sep 13, 2011 at 11:57 PM, RPK <panka...@gmail.com> wrote:
HOW MANY DAYS required to learn ns2 basics
dardouri...@gmail.com
Oct 13, 2020, 6:25:34 AM10/13/20
to Network Simulator 2 (NS2)
I am facing problem in simulating vanet CBRP routing protocol in ns2.
Can anyone please help me know the procedure or proper simulation steps?
voila:
num_nodes is set 40
warning: Please use -channel as shown in tcl/ex/wireless-mitf.tcl
can't read "ns": no such variable
while executing
"$ns node"
("for" body line 2)
invoked from within
"for {set i 0} {$i < $val(nn)} {incr i} {
[$ns node] set X [expr {10+round(rand()*40)}]
}"
(file "40CBRP-802_11p-vanet.tcl" line 63)
voila:
num_nodes is set 40
warning: Please use -channel as shown in tcl/ex/wireless-mitf.tcl
can't read "ns": no such variable
while executing
"$ns node"
("for" body line 2)
invoked from within
"for {set i 0} {$i < $val(nn)} {incr i} {
[$ns node] set X [expr {10+round(rand()*40)}]
}"
(file "40CBRP-802_11p-vanet.tcl" line 63)
knudfl
Oct 13, 2020, 6:53:21 AM10/13/20
to Network Simulator 2 (NS2)
@dardouri...@gmail.com
Could be there's an error in an early vesion of `40CBRP-802_11p-vanet.tcl´.
Anyway, the word ns in line 63 must be ns_
See cbrp-examples-3.tar.gz
https://drive.google.com/file/d/1PW5jitS_KobwgQq5ZsAzHteqkKDzVQzK/view?usp=sharing
Could be there's an error in an early vesion of `40CBRP-802_11p-vanet.tcl´.
Anyway, the word ns in line 63 must be ns_
See cbrp-examples-3.tar.gz
https://drive.google.com/file/d/1PW5jitS_KobwgQq5ZsAzHteqkKDzVQzK/view?usp=sharing
dardouri soumya
Oct 13, 2020, 11:53:13 AM10/13/20
to Network Simulator 2 (NS2)
--
You received this message because you are subscribed to the Google Groups "Network Simulator 2 (NS2)" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ns-users+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ns-users/a8d8bcc4-bf33-4343-84a7-bed8804b347en%40googlegroups.com.
Reply all
Reply to author
Forward
0 new messages