B-7971 Smart Socket - Round Version

[Richard Scales]

[Audrey]

Very nice

On Sun, Jun 27, 2021 at 1:53 AM Richard Scales <ric...@scalesweb.co.uk> wrote:

--
You received this message because you are subscribed to the Google Groups "neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/f78adf7e-4b03-4f87-87bf-b702254e55c7n%40googlegroups.com.

[Robert G. Schaffrath]

Is there a link about this socket? I have enough spare B-7971's to complete one.

[Richard Scales]

No  link yet, I have only just about completed testing the prototype - which works as it should.

I have a two board set, one is the actual smart-socket and the other is the board with HV power supply module (NCH8200HV) and WeMos controller. It also has space to mount a microwave/radar PIR.

I have a small quantity of these boards available, PM me if you are interested.

For the controller board i deliberated over whether to drive it from 12V or 5V via a USB - which had a bearing on how I generated the HV, in the end I elected to go with USB 5V and an NCH8200HV module for simplicity. For the PIR I left space for a couple of different types. Disappointingly, from those I had on hand, the one which fits best appears not to function that well. I have another type which I have yet to test with.

On the smart-socket, the PIC16F690 is located on the underside in SOIC format.

 - Richard

[Bill Notfaded]

Good Morning Richard-

I'd be down to try at least a set of them depending on how many boards you have?  I have many of the populated and some unpopulated original B-7971 smartsocket boards.

Bill