Anyone here own a Millclock ZIN-70 besides me?

[Mark Van Pelt]

Love my clock but there seems to be some bugs in the firmware. If any of you have one of these I'd love discuss the clock with you and see if some of my experiences are in line with yours.

[Richard Scales]

I don't have their clock - but i do have a board that drives 6 of their tubes as a wifi connected, ntp synced clock with motion detect option, web config, automatic time zone and DST , tube underlighting - just in case things go really bad....

Actually - I even have some boards for a two board version which take their colon towers too!

 - Richard

[Mark Van Pelt]

Is the board setup for z568m or the millclock in house pinout?

--
You received this message because you are subscribed to a topic in the Google Groups "neonixie-l" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/neonixie-l/xlBX84G1E4Q/unsubscribe.
To unsubscribe from this group and all its topics, send an email to neonixie-l+...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/4399a235-252f-415d-bcbc-d0c64a253ba5n%40googlegroups.com.

[Richard Scales]

Ah, good question, it is set up for Z568 - that could be an issue!
... though if there was sufficient interest I would make one for Millclock pinout.

 - Richard

[c ve]

I have both their Zin-70 and Zin-18 clocks. What's the issue? The app has issues, but the clock is great

Chris

[Mark Van Pelt]

Chris, I believe you and I have already spoken and are connected elsewhere. Thanks for reaching out!

You received this message because you are subscribed to the Google Groups "neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/5016bad0-4c07-451d-b69e-fc0baffe76d0n%40googlegroups.com.