You received this message because you are subscribed to the Google Groups "neonixie-l" group.--
To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscribe@googlegroups.com.
To post to this group, send an email to neoni...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/8b3b93df-f288-679b-bec5-330460fc6e13%40cqr-ltd.com.
--
You received this message because you are subscribed to the Google Groups "neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscribe@googlegroups.com.
To post to this group, send email to neoni...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/8f78b927-e9af-421b-98ae-c5fb6c0db238%40googlegroups.com.
Acrifix© has a very low viscosity cement for Plexiglas under the name Acrifix 1s 0117. The trick is to use a syringe with a needle to apply the glue.
Another way is to dissolve acrylic powder (saw dust) in chloroform or a less ‘suspect’ solvent to make your own glue and after fixing apply a little chloroform by a syringe along the seam.
Anyhow, it is important to use a cement that offers the same refractive index as the material you use.
eric
--
You received this message because you are subscribed to the Google Groups "neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+...@googlegroups.com.
To post to this group, send email to neoni...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/8f78b927-e9af-421b-98ae-c5fb6c0db238%40googlegroups.com.