--
You received this message because you are subscribed to a topic in the Google Groups "neonixie-l" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/neonixie-l/9A6rlLwCgjU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to neonixie-l+...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/344ed8c7-dfe1-4e55-a24f-8210dcc11e72%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/dfff2a91-bacd-4037-a0ff-de1e52824d91%40googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to neoni...@googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/29e3fcf8-161d-4e77-91ea-2115aab7c5c8%40googlegroups.com.
On Mar 24, 2020, at 4:22 AM, Richard Scales <ric...@scalesweb.co.uk> wrote:The only thing I would say is that the pins on SP-101's are really thin, they are lost in a 1.0mm pin socket. They are also lost in 0.75mm pin socket. I just measured the diameter of one of the pins and it was about 0.46mm which is super skinney.
On Mar 26, 2020, at 5:39 PM, 'John Rehwinkel' via neonixie-l <neoni...@googlegroups.com> wrote:These might work well.
Are you OK soldering them ? As long as you have a good-quality PCB manufacturer, the PCB will tolerate rework (install-remove-install).I had to deal with that with my watch; soldered-down an SP-151, then found I had to unsolder, remove, and re-install. Wasn't too bad.
--
You received this message because you are subscribed to the Google Groups "neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/dee6957a-7c6f-4aa1-ac2a-062d41d16e50%40googlegroups.com.