correct code plug. There should also be a link to the code plug
On 9/23/2021 10:13 PM, Nicholas Medeiros wrote:
> WA1NVC,
>
> Yes I tried that code plug and it didn’t seem to work correctly.
> However, I did fine a good article that walks you though the programming
> process. I’m about half way though the step so I keep everyone post on
> my progress.
>
> LoL radio programming software scrambles my brain and I forget how to spell.
>
> KC1LEU
>
> On Thu, Sep 23, 2021 at 21:02 Roger(WA1NVC) Coulson <
wa1...@gmail.com
> <mailto:
wa1...@gmail.com>> wrote:
>
> Have you tried the code plug on NEAR-900? It may be old but it is a
> good start.
>
> I hope my help is not asperated :-)
>
> Roger
> WA1NVC
>
>
> On 9/23/2021 5:52 PM, Nicholas Medeiros wrote:
> > Hello,
> > Looking for someone to help me set up my Kenwood tk981. Any help
> would
> > be asperated.
> > 73's
> > Nick KC1LEU
> > ---
> > You received this message because you are subscribed to the Google
> > Groups "Near-900" group.
> > To unsubscribe from this group and stop receiving emails from it,
> send
> > an email to
near-900+u...@googlegroups.com
> ---
> You received this message because you are subscribed to the Google
> Groups "Near-900" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to
near-900+u...@googlegroups.com
>
> --
> To unsubscribe from this group, send email to
>
near-900-u...@googlegroups.com
> ---
> You received this message because you are subscribed to the Google
> Groups "Near-900" group.
> To unsubscribe from this group and stop receiving emails from it, send