Bug 2 MLO suddenly refuses to allow more than one subtask

[Alexis]

I don´t know what happened and i don´t know the solution but suddenly my MLO does not allow more than one subtask. This of course was not in the beginning and older files does not show that behaviour.

Thank You
Alex

[Andrei]

Try to reset the default "All tasks" view. Maybe you did some changes to it.
Best regards
Andrei B

понедельник, 29 сентября 2014 г., 21:04:28 UTC+3 пользователь Alexis написал:

[Dwight Arthur]

Two thoughts.

 

First, you are experiencing acceptable MLO behavior from MLO for a period of time and then, without you changing versions, the behavior changes to something unacceptable. How could this happen? Thought, did you get to the end of the 45 day trial period and the software downgraded? I don’t recall anything in trial mode about limiting the number of subtasks, but this is the only thing I can think of that automatically downgrades after a period of time.

 

Second, is it possible that you are looking at a to-do list filtered by active tasks, and that your parent tasks have “complete subtasks in order” set? This setting would force the first available subtask under each such parent to be the only active subtask and therefore to be the only subtask visible in the view.

--
You received this message because you are subscribed to the Google Groups "MyLifeOrganized" group.
To unsubscribe from this group and stop receiving emails from it, send an email to mylifeorganiz...@googlegroups.com.
To post to this group, send email to mylifeo...@googlegroups.com.
Visit this group at http://groups.google.com/group/mylifeorganized.
To view this discussion on the web visit https://groups.google.com/d/msgid/mylifeorganized/ee061803-14de-4c9c-a688-33208bf8223a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Alexis]

Dear Andrei,

first of all i´m pleased the developer of MLO takes the time to look into this.

Resetting "All tasks" view" did not do the trick. There all subtask were visible. But resetting the current view which showed the problem did. I thought it would be helpful to save the .ml file and send it to support. I just did. Most of my tasks are deleted but there is still one parent task which shows the problem.

Thank You
Alex

@Dwight:  I´m continuesly using 4.3.1. I did not use the function "complete subtasks in order"

[Andrei]

Hello Alex

Sorry, i am not the developer of MLO.
My name is Andrei Bacean. Shortly, Andrey B.
The developer is Andrei Tkachuk.
His signature is "Andrey."

Best wishes
Andrei B

вторник, 30 сентября 2014 г., 10:18:56 UTC+3 пользователь Alexis написал:

[Alexis]

LOL, thank you anyway!