2.2.1 Bug: Configure dialog opens mostly off screen

[Scott Youngman]

(version 2.2.1, Win7 x64) When I open the Configuration dialog, only the lower right corner appears on screen; the rest of the dialog interface is out of view off the upper left corner of the screen. It can be brought back into view by holding the mouse arrow over the visible portion of the dialog interface, and against the top or left edge of the screen. The screenshot below shows the upper left corner of my screen with the Configuration dialog as it opened, mostly off the screen.

[Peter Bienstman]

I assume what happened here is that you closed Mnemosyne, decreased your display resolution, and then opened it again. Not sure I can really do anything about this, also because saving/restoring window state and position is handled by Qt, not by Mnemosyne directly.

Cheers,

Peter

> <https://lh4.googleusercontent.com/-
> NWt8ttGaOds/UzEaYjIwnfI/AAAAAAAAABY/ogYfnXJ5Axs/s1600/Config+dial
> og+opens+in+upper+right+corner+of+screen.jpg>
>
> --
> You received this message because you are subscribed to the Google Groups
> "mnemosyne-proj-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to mnemosyne-proj-u...@googlegroups.com.
> To post to this group, send email to mnemosyne-proj-
> us...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/mnemosyne-proj-users/66cbf85e-
> db37-4c76-92f7-afcb8f43722f%40googlegroups.com
> <https://groups.google.com/d/msgid/mnemosyne-proj-users/66cbf85e-
> db37-4c76-92f7-
> afcb8f43722f%40googlegroups.com?utm_medium=email&utm_source=foot
> er> .
> For more options, visit https://groups.google.com/d/optout.

[Scott Youngman]

I made no change to the display resolution, so that's not the cause. But if it's a Qt issue, there's nothing that we can do anyway. Thanks.

[Scott Youngman]

This problem is not happening any more; it resolved itself. 

Scott

[Scott Youngman]

I spoke too soon; the problem is back again. I'm going to be watching for the triggering conditions, but for now I suspect it happens after changing a card type's background color.