New User

[Dan Roman]

I recently dug my Current Cost EnviR out of the junk drawer and it still works.  Was looking for a way to collect data and stumbled across measuerit.  I have verified that I can read data from it using the GPIO serial port on a PI 2.

Attempted an install from here on github but it was a mess.  I'm on buster and the HarvsG github was pretty old.

Stumbled across this group and thought I'd ask what the preferred more up-to-date install method was in order to get energy monitoring going.  Is measureit the only choice besides do it yourself?

Thanks!

[Thomas]

Hi Dan,

if you want to use measureit just download the raspberry image, flash it to a sd card and be happy :)

https://gitlab.com/lalelunet/measureit/-/releases

[Dan Roman]

Ah, glad I asked.  Much easier and it works!  The only thing I had to do was go into the code and change the tty device to use the GPIO.  Last step is to configure an IAM.  Was a little confused on the terminology of sensor, clamp, position but I think I got it worked out.

Thanks!

--
You received this message because you are subscribed to a topic in the Google Groups "measureit" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/measureit/zvimCek61ow/unsubscribe.
To unsubscribe from this group and all its topics, send an email to measureit+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/measureit/6a0a89d0-a2e9-419f-a289-a232ca84de1en%40googlegroups.com.

--

Dan Roman

gdan...@gmail.com