EEMUA 234 90/10 CU NI ASTM 466 UNS 70610 Vs UNS 7060X
Inspection engineer
pgos...@rogers.com
Hi,
This grade of alloy is conventional 90/10 cupronickel. See the link below from the EEMUA webpage.
ASTM 466UNS 70610(Copper Alloy (UNS C70610) (azom.com)) is also of the same chemistry as that of the EEMUA grade. Refer the attached data sheet for guidance on welding fillers.
You may search in the web for additional resources on welding consumable manufacturers.
Thanks.
Pradip Goswami.P.Eng, IWE.
Independent Welding & Metallurgical Engineering Specialist
Saudi Aramco Approved Designated Project Welding Engineer (DPWR)
Qatar Petroleum Approved, SME-Materials & Corrosion Engineering.
Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/
Email:pgos...@rogers.com,pradip....@gmail.com
Cell/Whasapp:1-905-9793232
From: material...@googlegroups.com <material...@googlegroups.com> On Behalf Of Inspection engineer
Sent: December 17, 2021 8:42 PM
To: Materials & Welding <material...@googlegroups.com>
Subject: [MW:32689] EEMUA 234 90/10 CU NI ASTM 466 UNS 70610 Vs UNS 7060X
Greetings
Please kindly advise whether EEMUA 234 90/10 CU NI, ASTM 466 UNS 70610 and UNS 7060X are same ?
what are the suitable filler materials required for welding ?
Regards
Viswa Manoj
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d55007b6-94c2-42d0-bde0-f401de7a75c2n%40googlegroups.com.
