Pentameter selection

[subrata das]

Dear All

What type of Pentameter should i use during Radiography Test of a butt weld joint of 50 mm diameter & 12 mm thickness and joint between A182 F91(WN Flange) to SB622 UNS N10276(Pipe).

 

Regards

Subrata Das

 

[Bathula Raghuram (Mumbai - PIPING)]

It should be penetrameter, and the term penetrameter no longer used in Article 2 of ASME Section V now it is being referred as image quality indicator (IQI). You can select the IQI material from the less radiation absorbing material out of this two (material group 1, CS or SS will do).

---

From: material...@googlegroups.com [mailto:material...@googlegroups.com] On Behalf Of subrata das
Sent: Monday, August 16, 2010 12:59 PM
To: material...@googlegroups.com
Subject: [MW:6511] Pentameter selection

[Kam Raj]

Hi,

For IQI (Penetrameter) selection you have choose 2 % of job thickness. In IQI we have ASTM hole type and DIN wire Type.

You can select ASTM hole type designation is 10 or 12 size.
For Wire type you can select set III. (Here we have three sets Like SET 1, SET II, SET III).

Regards

Kamaraj
Aurotech Inspection Services.,
EMail: aurot...@gmail.com
Trichy

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
Kamaraj. M
Aurotech Inspection Services.,
#22/1A, 8th Cross East,
Thillai Nagar, Trichy 620 018.
Tamil Nadu, India.
Email: kam...@gmail.com
Phone: +91 431 4023723
Mobile: +91 98415 52523
www.aurotech.co.in

[SENTHILKUMAR SWAMINATHAN]

May this help you S.Das.
 

Regards,
S.SENTHILKUMAR

---

From: Kam Raj <kam...@gmail.com>
To: material...@googlegroups.com
Sent: Tue, 17 August, 2010 5:58:46 AM
Subject: Re: [MW:6534] Image quality indicator (IQI) selction for disimilar materials

[Jibin.P Sam]

ASTM HOLE TYPE 15 , WIRE TYPE 1B 11