tubular bevel problem in TYK joint in AWS D1.1

[Dương Vinh Quang]

Hi everyone, I would like to ask about the beveling issue in the AWS D1.1 standard when welding tubular in TYK joint, what part of the beveling issue is covered in AWD D1.1. I can not find it.

[xuanth...@gmail.com]

Hi sir,

Pls see the clause 10/ AWS D1.1,

You can see the detail at Figure 10.5 to 10.10

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/b0f27ff7-32e2-49b4-a97c-ded6879eb9d9n%40googlegroups.com.

[Dương Vinh Quang]

In aws d1.1, no show about bevel angle, pls check and hep me

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/70bd01d98101%2454731980%24fd594c80%24%40gmail.com.

[xuanth...@gmail.com]

Please see the below:

 

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOdNLKgSSp%2B-uKkhDiEjUkVA-iv%2Be0CujFrjeGjO_VHkuzyTPw%40mail.gmail.com.