Electrode for Material SA516 Gr70

[Kiran]

Dear All,

Please refer below mentioned details and please let me know, can I use this details in PWPS as per D1.1.

 

1) Material -SA 516 Gr.70 to SA 516 Gr.70

2) P No- 1 Group No - 2 to P No- 1 Group No - 2

3) F No- 4

 

4) A No-1

5) SFA No- 5.1

6) AWS No(Class) -E-6013.

I have debut about electrode.  

If any thing please wright briefly.

Thanks and Regards

Kiran 

[Dinesh Somwanshi]

Please proceed with 7018 low hydrogen electrode. Suggested h2 level should be less than 10mg.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/a45e40b7-5849-44b8-80b2-9c2551ce957c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[anand gupta]

I think for SA 516 GR 70 is best electrode is E7018. 

Regards 

A p gupta 

Sent from Yahoo Mail on Android

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.

[ROHAN SONI]

With E6013 you will not get strength you should go for E7018 electrode with low hydrogen content

Regards,

Rohan soni

8238850741

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/828500067.1434857.1557234718674%40mail.yahoo.com.

[George Dilintas]

I would suggest E7018

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/a45e40b7-5849-44b8-80b2-9c2551ce957c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--

Dr. Georgios Dilintas,

Dipl. Ing. In Aeronautic and Space Engineering

Ph.D in Mechanics of Solids - Computational Mechanics

A.I.S, A.N.I, IRCA Lead Auditor

Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis

[Mohammed afzal Khateawdi]

E 7018 my suggestion...

Regards

Afzal...

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40D9VGKD3ZhKnkB15mXi%2BUiGEpCBzRWR4eGKOkqbwXHpxA%40mail.gmail.com.

[Bien ND]

E7016/ E7018

[Vinay Thattey]

Dear , 6013 is a low cost b

electrode  but you will compromise on   strength of joint. The plate material selected i.e. SA 516 Gr 70 is a material of reasonable good strength . E7018 is better and appropriate choice .

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/b7cd973a-8c93-4437-9984-cd00da574b60%40googlegroups.com.