material identification as per PMI results

[Elshan Feyzullayev]

Gents

There is a PMI test result which is as follows:

Ni-0.18%, Cr-1.37%, Fe-96.50%, Mn-0.84%, Mo-0.22%. This is a piece of steel pin. Can anyone suggest the rough material grade that this pin has been made off?

Your thoughts will be highly appreciated.

Many thanks

[C.Muni]

Its 1 Cr 0.5 Mo low alloy steel

Regards,

 Muniyandi Chithiran MBA.,MIIF,

AWS Certified Welding Inspector,

ISO 9001,14001,17025, Lead Auditor,

NDT Level II-RT,UT,MT,PT,

Mobile: 0091 95855 40965,99947 65591

Go where you are celebrated not where you are tolerated.
Comfort is the enemy of achievement.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
To post to this group, send email to material...@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/HE1PR05MB14334D0F0276A78D94D9CF87EBC40%40HE1PR05MB1433.eurprd05.prod.outlook.com.
For more options, visit https://groups.google.com/d/optout.

[Lu, Feng]

It seems to be 4130 but you may further check carbon content to see if it is close to 0.3%.

--